MQTT消息中間件Mosquitto的安裝和配置


特別提示:本人博客部分有參考網絡其他博客,但均是本人親手編寫過並驗證通過。如發現博客有錯誤,請及時提出以免誤導其他人,謝謝!歡迎轉載,但記得標明文章出處: http://www.cnblogs.com/mao2080/

1、Mosquitto簡介

Mosquitto簡介是一個開源(BSD許可證)的消息代理,實現MQTT(消息隊列遙測傳輸)協議版本3.1.1。
MQTT(MQ Telemetry Transport),消息隊列遙測傳輸協議,輕量級的發布/訂閱協議,適用於一些條件比較苛刻的環境,進行低帶寬、不可靠或間歇性的通信。目前已經是物聯網消息通信事實上的標准協議了。

值得一提的是mqtt提供三種不同質量的消息服務:
“至多一次”:消息發布完全依賴底層 TCP/IP 網絡。會發生消息丟失或重復。這一級別可用於如下情況,環境傳感器數據,丟失一次讀記錄無所謂,因為不久后還會有第二次發送。
“至少一次”:確保消息到達,但消息重復可能會發生。
“只有一次”:確保消息到達一次。這一級別可用於如下情況,在計費系統中,消息重復或丟失會導致不正確的結果。

2、安裝步驟

a、配置yum

在/etc/yum.repos.d/ 目錄中新建一個mosquitto.repo文件,文件內容如下:

 
        
[home_oojah_mqtt]
name=mqtt (CentOS_CentOS-6)
type=rpm-md
baseurl=http://download.opensuse.org/repositories/home:/oojah:/mqtt/CentOS_CentOS-6/
gpgcheck=1
gpgkey=http://download.opensuse.org/repositories/home:/oojah:/mqtt/CentOS_CentOS-6/repodata/repomd.xml.key
enabled=1
 
        

b、使用yum在線安裝

# yum search all mosquitto  
# yum install mosquitto mosquitto-clients libmosquitto-devel libmosquittopp-devel python-mosquitto

c、配置文件

# =================================================================
# General configuration
# =================================================================
# 客戶端心跳的間隔時間
#retry_interval 20
# 系統狀態的刷新時間
#sys_interval 10
# 系統資源的回收時間,0表示盡快處理
#store_clean_interval 10
# 服務進程的PID
#pid_file /var/run/mosquitto.pid
# 服務進程的系統用戶
#user mosquitto
# 客戶端心跳消息的最大並發數
#max_inflight_messages 10
# 客戶端心跳消息緩存隊列
#max_queued_messages 100
# 用於設置客戶端長連接的過期時間,默認永不過期
#persistent_client_expiration
# =================================================================
# Default listener
# =================================================================
# 服務綁定的IP地址
#bind_address
# 服務綁定的端口號
#port 1883
# 允許的最大連接數,-1表示沒有限制
#max_connections -1
# cafile:CA證書文件
# capath:CA證書目錄
# certfile:PEM證書文件
# keyfile:PEM密鑰文件
#cafile
#capath
#certfile
#keyfile
# 必須提供證書以保證數據安全性
#require_certificate false
# 若require_certificate值為true,use_identity_as_username也必須為true
#use_identity_as_username false
# 啟用PSK(Pre-shared-key)支持
#psk_hint
# SSL/TSL加密算法,可以使用“openssl ciphers”命令獲取
# as the output of that command.
#ciphers
# =================================================================
# Persistence
# =================================================================
# 消息自動保存的間隔時間
#autosave_interval 1800
# 消息自動保存功能的開關
#autosave_on_changes false
# 持久化功能的開關
persistence true
# 持久化DB文件
#persistence_file mosquitto.db
# 持久化DB文件目錄
#persistence_location /var/lib/mosquitto/
# =================================================================
# Logging
# =================================================================
# 4種日志模式:stdout、stderr、syslog、topic
# none 則表示不記日志,此配置可以提升些許性能
log_dest none
# 選擇日志的級別(可設置多項)
#log_type error
#log_type warning
#log_type notice
#log_type information
# 是否記錄客戶端連接信息
#connection_messages true
# 是否記錄日志時間
#log_timestamp true
# =================================================================
# Security
# =================================================================
# 客戶端ID的前綴限制,可用於保證安全性
#clientid_prefixes
# 允許匿名用戶
#allow_anonymous true
# 用戶/密碼文件,默認格式:username:password
#password_file
# PSK格式密碼文件,默認格式:identity:key
#psk_file
# pattern write sensor/%u/data
# ACL權限配置,常用語法如下:
# 用戶限制:user <username>
# 話題限制:topic [read|write] <topic>
# 正則限制:pattern write sensor/%u/data
#acl_file
# =================================================================
# Bridges
# =================================================================
# 允許服務之間使用“橋接”模式(可用於分布式部署)
#connection <name>
#address <host>[:<port>]
#topic <topic> [[[out | in | both] qos-level] local-prefix remote-prefix]
# 設置橋接的客戶端ID
#clientid
# 橋接斷開時,是否清除遠程服務器中的消息
#cleansession false
# 是否發布橋接的狀態信息
#notifications true
# 設置橋接模式下,消息將會發布到的話題地址
# $SYS/broker/connection/<clientid>/state
#notification_topic
# 設置橋接的keepalive數值
#keepalive_interval 60
# 橋接模式,目前有三種:automatic、lazy、once
#start_type automatic
# 橋接模式automatic的超時時間
#restart_timeout 30
# 橋接模式lazy的超時時間
#idle_timeout 60
# 橋接客戶端的用戶名
#username
# 橋接客戶端的密碼
#password
# bridge_cafile:橋接客戶端的CA證書文件
# bridge_capath:橋接客戶端的CA證書目錄
# bridge_certfile:橋接客戶端的PEM證書文件
# bridge_keyfile:橋接客戶端的PEM密鑰文件
#bridge_cafile
#bridge_capath
#bridge_certfile
#bridge_keyfile
# 自己的配置可以放到以下目錄中
include_dir /etc/mosquitto/conf.d

3、啟動服務

# mosquitto -c /etc/mosquitto/mosquitto.conf -d  
# sudo /etc/init.d/mosquitto start

4、測試服務

一、開啟另一個終端窗口,運行訂閱程序mosquitto_sub:
*注意:消息推送的發布和訂閱要有主題,選項[-t] 主題,即:
mosquitto -t 主題
如需指定用戶名稱則加選項[-i] 用戶名,即:
mosquitto_sub -t 主題 -i 訂閱端

# mosquitto_sub -t mqtt

二、開啟另一個終端窗口,運行發布程序mosquitto_pub:
指定消息推送的主題,發布端用戶名和消息:
mosquitto_pub -t 主題 -i 發布端 -h 主機 -m 你好
*注意:如果消息中間有空格則消息要用引號括起來。
mosquitto_pub -t 主題 -i 發布端 -h host -m ‘我是發布端,你好。

# mosquitto_pub -h localhost -t mqtt -m "hello world."

這時候前面那個訂閱窗口就可以收到”hello world”的消息了。

5、參考網站

http://yidao620c.iteye.com/blog/2134715


免責聲明!

本站轉載的文章為個人學習借鑒使用,本站對版權不負任何法律責任。如果侵犯了您的隱私權益,請聯系本站郵箱yoyou2525@163.com刪除。



 
粵ICP備18138465號   © 2018-2025 CODEPRJ.COM