Nginx+keepalived 雙機熱備（主主模式）

 

之前已經介紹了Nginx+Keepalived雙機熱備的主從模式，今天在此基礎上說下主主模式的配置。

由之前的配置信息可知：
master機器（master-node）：103.110.98.14/192.168.1.14      VIP1:103.110.98.20
slave機器（slave-node）：103.110.98.24/192.168.1.24       VIP2:103.110.98.21

主主模式需要兩個負載均衡的VIP，
之前設置了VIP（103.110.98.20）
所以還需要設置另一個VIP（103.110.98.21）

修改keepalived的配置

1）master負載機上的keepalived配置：（注意，這里是雙主配置，MASTER-BACKUP和BACKUP-MASTER;如果是多主，比如三主，就是MATER-BACKUP-BACKUP、BACKUP-MASTER-BACKUP和BACKUP-BACKUP-MASTER）
注意：
配置中的虛擬路由標識virtual_router_id在MASTER和BACKUP處配置不能一樣（但在主從模式下配置是一樣的）

[root@master-node ~]# vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived     
  
global_defs {
notification_email {     
[e-mail]   
[e-mail]
}
  
notification_email_from [e-mail]  
smtp_server 127.0.0.1      
smtp_connect_timeout 30    
router_id master-node     
}
  
vrrp_script chk_http_port {      
    script "/opt/chk_nginx.sh"   
    interval 2                   
    weight -5                    
    fall 2                    
    rise 1                    
}
  
vrrp_instance VI_1 { 
    state MASTER    
    interface em1          
    mcast_src_ip 103.110.98.14 
    virtual_router_id 51        
    priority 101                 
    advert_int 1                 
    authentication {             
        auth_type PASS          
        auth_pass 1111           
    }

track_script {                     
   chk_http_port                    
}

virtual_ipaddress {         
    103.110.98.20
}

notify_master "/etc/keepalived/clean_arp.sh 103.110.98.20"
}

vrrp_instance VI_2 {            
    state BACKUP           
    interface em1            
    mcast_src_ip 103.110.98.24  
    virtual_router_id 52       
    priority 99               
    advert_int 1               
    authentication {            
        auth_type PASS         
        auth_pass 1111          
    }
 
track_script {                     
   chk_http_port                 
}
virtual_ipaddress {        
    103.110.98.21
    }
notify_master "/etc/keepalived/clean_arp.sh 103.10.86.21"
}

[root@master-node ~]# vim /etc/keepalived/clean_arp.sh         //更新vip的arp記錄到網關（注意腳本中的網卡別填錯了，要跟vip所在網卡一致）
#!/bin/sh
VIP=$1
GATEWAY=103.110.98.1                                                         //負載均衡器的公網網關地址
/sbin/arping -I em1 -c 5 -s $VIP $GATEWAY &>/dev/null
[root@master-node ~]# chmod 755 /etc/keepalived/clean_arp.sh

2）slave負載機上的keepalived配置：

[root@slave-node ~]# vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived     
  
global_defs {
notification_email {     
[e-mail]   
[e-mail]
}
  
notification_email_from [e-mail]  
smtp_server 127.0.0.1      
smtp_connect_timeout 30    
router_id slave-node     
}
  
vrrp_script chk_http_port {      
    script "/opt/chk_nginx.sh"   
    interval 2                   
    weight -5                    
    fall 2                    
    rise 1                    
}
  
vrrp_instance VI_1 { 
    state BACKUP    
    interface em1          
    mcast_src_ip 103.110.98.14
    virtual_router_id 51        
    priority 99                 
    advert_int 1                 
    authentication {             
        auth_type PASS          
        auth_pass 1111           
    }

track_script {                     
   chk_http_port                    
}

virtual_ipaddress {         
    103.110.98.20
}

notify_master "/etc/keepalived/clean_arp.sh 103.110.98.20"
}

vrrp_instance VI_2 {            
    state MASTER           
    interface em1            
    mcast_src_ip 103.110.98.24 
    virtual_router_id 52       
    priority 101               
    advert_int 1               
    authentication {            
        auth_type PASS         
        auth_pass 1111          
    }
 
track_script {                     
   chk_http_port                 
}
virtual_ipaddress {        
    103.110.98.21
    }
notify_master "/etc/keepalived/clean_arp.sh 21"
}

[root@slave-node ~]# vim /etc/keepalived/clean_arp.sh
#!/bin/sh
VIP=$1
GATEWAY=103.110.98.1
/sbin/arping -I em1 -c 5 -s $VIP $GATEWAY &>/dev/null
[root@slave-node ~]# chmod 755 /etc/keepalived/clean_arp.sh

重啟master和slave負載機的keepalive（保證兩台機器的ngixn和keepalived服務都啟動）
[root@master-node ~]# /etc/init.d/keepalived restart
[root@slave-node ~]# /etc/init.d/keepalived restart

將nginx中配置的域名解析到這兩個VIP地址上：
103.110.98.20 dev.wangshibo.com
103.110.98.21 dev.wangshibo.com

瀏覽器訪問是正常的（如果master或slave有一台宕機，或其中一個VIP故障，只要另一台是正常的就行）

 

關閉兩台負載機其中一台的keepalived服務，那么它的VIP就會自動漂移到另一台機器上。
關閉兩台機器的nginx，會自動重啟（前提是keepalived服務要啟動）！對網站域名的訪問絲毫不受影響。

[root@master-node ~]# pkill -9 nginx
root 32365 9775 0 19:04 pts/0 00:00:00 grep --color=auto nginx
[root@master-node ~]# ps -ef|grep nginx
root 32367 9775 0 19:04 pts/0 00:00:00 grep --color=auto nginx
[root@master-node ~]# ps -ef|grep nginx
root 32369 32368 0 19:04 ? 00:00:00 /bin/bash /opt/chk_nginx.sh
root 32374 1 0 19:04 ? 00:00:00 nginx: master process /usr/local/nginx/sbin/nginx
www 32376 32374 1 19:04 ? 00:00:00 nginx: worker process
www 32377 32374 1 19:04 ? 00:00:00 nginx: worker process
www 32378 32374 1 19:04 ? 00:00:00 nginx: worker process
www 32379 32374 1 19:04 ? 00:00:00 nginx: worker process
www 32380 32374 1 19:04 ? 00:00:00 nginx: worker process
www 32381 32374 1 19:04 ? 00:00:00 nginx: worker process
www 32382 32374 1 19:04 ? 00:00:00 nginx: worker process
www 32383 32374 1 19:04 ? 00:00:00 nginx: worker process
www 32384 32374 0 19:04 ? 00:00:00 nginx: cache manager process
www 32385 32374 0 19:04 ? 00:00:00 nginx: cache loader process
root 32387 9775 0 19:04 pts/0 00:00:00 grep --color=auto nginx