手動編寫的幾個簡單的puppet管理配置

 

puppet在自動化配置管理方面有很強大的優勢，這里就不做過多介紹了，下面記錄下幾個簡單的puppet管理配置：

一、首先在服務端和客戶端安裝puppet和facter

1）服務端
安裝Puppet Labs
# rpm -ivh http://yum.puppetlabs.com/el/6.5/products/x86_64/puppetlabs-release-6-12.noarch.rpm

安裝Puppet和facter
# yum install puppet puppet-server facter

2）客戶端
安裝Puppet Labs
# rpm -ivh http://yum.puppetlabs.com/el/6.5/products/x86_64/puppetlabs-release-6-12.noarch.rpm

安裝Puppet和facter
# yum install puppet facter

二、puppet配置及證書簽收

1）客戶端和服務端分別做host主機映射（或者做內網DNS解析）
192.168.1.10 puppet01.wang.com            #服務端
192.168.1.11 puppet02.wang.com            #客戶端

2）在客服端的puppet.conf配置文件里
[root@puppet02 ~]# cat /etc/puppet/puppet.conf 
[main]
    server=puppet01.wang.com
    ......

3）分別啟動puppet服務（注意服務端和客戶端的iptables防火牆最好關閉，如果開啟的話，要記得開放puppet端口8140的訪問）
服務端
[root@puppet01 ~]# /etc/init.d/puppetmaster start

客服端
[root@puppet02 ~]# /etc/init.d/puppet start

4）自動注冊證書配置
服務端
[root@puppet01 ~]# cat /etc/puppet/puppet.conf
[main]
    ......
    autosign = true
    autosign = /etc/puppet/autosign.conf

[root@puppet01 ~]# cat /etc/puppet/autosign.conf        #創建自動注冊配置文件，下面表示對所有主機的注冊進行簽收
*

[root@puppet01 ~]# /etc/init.d/puppetmaster restart

客戶端進行注冊
[root@puppet02 ~]# puppet agent --test --server=puppet01.wang.com
Notice: Ignoring --listen on onetime run
Info: Retrieving pluginfacts
Info: Retrieving plugin
Info: Caching catalog for puppet02.wang.com
Info: Applying configuration version '1501320900'
Notice: Finished catalog run in 0.42 seconds

服務端發現已經自動簽收了證書
[root@puppet01 ~]# puppet cert --list --all
+ "puppet01.wang.com" (SHA256) 3E:99:64:73:14:D5:BA:01:62:2F:53:62:A6:07:55:AB:BA:BE:70:6E:7E:60:7A:81:41:10:63:78:C0:FD:E4:56 (alt names: "DNS:puppet", "DNS:puppet.wang.com", "DNS:puppet01.wang.com")
+ "puppet02.wang.com" (SHA256) A4:EF:73:62:3A:DD:F9:2E:E4:12:8F:2E:AE:90:96:43:95:7A:4C:9F:38:02:44:B7:81:C5:08:B5:16:95:42:0B

三、puppet自動化管理配置

在puppet master服務端進行puppet管理條目的配置，配置好之后，這些條目會被發送到puppet agent節點機器上，並被應用到agent節點機器上（即puppet master的"推"操作）。如果agent節點機器以守護進程方式運行，
它會默認每隔30分鍾連接一次，並檢查自己所在主機的配置是否發生了變化或者增加了新的配置。可以通過修改agent上/etc/puppet/puppet.conf文件中的runinterval項來修改這個時間間隔，比如修改時間間隔為1小時
"runinterval = 3600"。同時，agent節點機器也可以通過cron進行定時任務的主動連接（即puppet agent的"拉"操作），
結合master和agent的一"推"一"拉"的操作。
   
1）在puppet master端進行配置
[root@puppet01 puppet]# ll
total 36
-rw-r--r--  1 root root 4178 Jul 29 16:25 auth.conf
-rw-r--r--  1 root root    2 Jul 29 16:25 autosign.conf
drwxr-xr-x  3 root root 4096 Jul 29 16:25 environments
-rw-r--r--  1 root root 1462 Jul 29 16:25 fileserver.conf
drwxr-xr-x  2 root root 4096 Jul 29 17:22 manifests
drwxr-xr-x 13 root root 4096 Jul 29 17:03 modules
-rw-r--r--  1 root root  915 Jul 29 16:25 puppet.conf
   
先創建模塊可以手動創建，也可以通過命令創建，不過要修改模塊名稱。
[root@puppet01 puppet]# cd modules/
[root@puppet01 modules]# puppet module generate propupet-ssh       #命令行創建模塊的命令。模塊名稱格式"puppet-模塊名""
[root@puppet01 modules]# mv propupet-ssh ssh        #修改為ssh模塊
   
或者手動創建模塊
[root@puppet01 modules]# mkdir ssh       #不過還要手動創建模塊下的目錄結構
[root@puppet01 modules]# mkdir ssh/files    #保存模塊需要用到的文件
[root@puppet01 modules]# mkdir ssh/manifests   #puppet配置文件的存放目錄
[root@puppet01 modules]# mkdir ssh/templates    #保存模塊中用到的模板
   
modules模塊配置好之后，要在/etc/puppet/manifests/site.pp清單文件中進行引用（如下最后會提到）。
   
2）參考下面幾個模塊的配置：
[root@puppet01 modules]# pwd
/etc/puppet/modules
   
--------------------ssh安裝管理模塊--------------------
[root@puppet01 manifests]# cd /etc/puppet/modules/ssh
[root@puppet01 ssh]# cd manifests/
[root@puppet01 manifests]# ls
config.pp  init.pp  install.pp  service.pp
[root@puppet01 manifests]# cat init.pp
class ssh {
  class { '::ssh::install':} ->
  class { '::ssh::config':} ->
  class { '::ssh::service':} ->
  Class['ssh']
}
[root@puppet01 manifests]# cat install.pp
class ssh::install {
  package { "openssh":               #安裝包名為openssh
    ensure => present,               #保證該包被安裝
  }
}
[root@puppet01 manifests]# cat config.pp
class ssh::config {
  file { "/etc/ssh/sshd_config":              #ssh諸如端口、用戶名、密碼登錄的控制都可以事先放在模塊的files下的sshd_config文件了，然后利用puppet同步到目標機器上。修改后會自動重啟sshd（service類里會自動重啟）
    ensure => present,
    owner => 'root',
    group => 'root',
    mode => 0600,
    source => "puppet:///modules/ssh/sshd_config",     #即sshd_config文件存放在/etc/puppet/modules/ssh/files目錄下。注意files目錄不寫在路徑中。
    require => Class["ssh::install"],                  #該文件資源存在的前提條件
    notify =>  Class["ssh::service"],                  #該文件資源存在后通知ssh::service類
    }
}
[root@puppet01 manifests]# cat service.pp
class ssh::service {
  service { "sshd":
    ensure => running,
    hasstatus => true,
    hasrestart =>true,
    enable => true,
    require => Class["ssh::config"],
    }
}
   
[root@puppet01 manifests]# ls ../files/sshd_config
../files/sshd_config
  
   
--------------------DNS配置管理--------------------
[root@puppet ~]# cd /etc/puppet/modules/dns/
[root@puppet dns]# ls
files  manifests
[root@puppet dns]# cd manifests/
[root@puppet manifests]# ls
config.pp  init.pp  restart.pp  setup.pp
[root@puppet manifests]# cat init.pp
class dns {
  include dns::config
  include dns::setup
  include dns::restart
  }
[root@puppet manifests]# cat config.pp
class dns::config {
  file { "/etc/named":
  ensure  => directory,
  source => "puppet:///modules/dns/pro-dns/DNS/etc/named",
  recurse => true,
  }
  
  file { "/var/named":
  ensure  => directory,
  source =>"puppet:///modules/dns/pro-dns/DNS/var/named",
  recurse => true,
  }
}
  
[root@puppet manifests]# cat setup.pp
class dns::setup {
  exec {"Set permissions of etc-named":
  cwd => "/etc",
  command => "/bin/chown -R root.named named",
  path =>["/usr/bin:/usr/sbin:/bin:/sbin"],
  require => Class["dns::config"],
  }
  
  exec {"Set permissions of var-named":
  cwd => "/var",
  command => "/bin/chown -R root.named named && /bin/chown -R named.named named/data/",
  path =>["/usr/bin:/usr/sbin:/bin:/sbin"],
  require => Class["dns::config"],
  }
  
}
[root@puppet manifests]# cat restart.pp
class dns::restart {
  exec {"restart named service":
  command => "service named restart",
  path => ["/usr/bin:/usr/sbin:/bin:/sbin"],
  require => Class["dns::config"],
  }
}
  
files目錄下存放的是DNS的配置文件和正反向解析文件（可以放到gitlab的pro-dns項目的DNS目錄下，通過git clone下載）
[root@puppet manifests]# cd ../files/
[root@puppet files]# ls
pro-dns
[root@puppet files]# ls pro-dns/DNS/
etc  var
[root@puppet files]# ls pro-dns/DNS/etc/named/
named.conf
[root@puppet files]# ls pro-dns/DNS/var/named/
192.168.10.zone  192.168.16.zone  192.168.32.zone  192.168.33.zone  192.168.34.zone  192.168.64.zone  192.168.8.zone  wangshibo.cn
  
  
--------------------java7安裝管理模塊--------------------
[root@puppet01 java7]# cd manifests/
[root@puppet01 manifests]# ls
init.pp  install.pp
[root@puppet01 manifests]# cat init.pp
class java7 {
  include java7::install
}
[root@puppet01 manifests]# cat install.pp
class java7::install {
  file { "/data/software/java-jdk7_install.sh":                    #文件資源
    source => "puppet:///modules/java7/java-jdk7_install.sh",
    owner => root,
    group => root,
    mode => 0755
    }
   
  exec { "install jdk":                             #命令資源
    cwd => "/data/software",
    command => "/bin/bash java-jdk7_install.sh",
    user => "root",
    group => "root",
    path =>["/usr/bin:/usr/sbin:/bin:/sbin"],
    creates =>"/usr/java/jdk1.7.0_80",                            #當/usr/java/jdk1.7.0_80文件存在時，不執行該命令。只有當不存在時執行！
    require =>File["/data/software/java-jdk7_install.sh"]         #該命令資源執行的前提條件
    }
}
[root@puppet01 manifests]# cd ../files/
[root@puppet01 files]# ll
total 4
-rwxr-xr-x 1 root root 756 Jul 29 16:25 java-jdk7_install.sh
[root@puppet01 files]# cat java-jdk7_install.sh
#!/bin/bash
   
/bin/rpm -qa|grep jdk|xargs rpm -e
   
# install jdk7
/bin/rpm -ivh  http://yum.wang.com/software/jdk-7u80-linux-x64.rpm
   
# set env
NUM=`cat /etc/profile|grep "JAVA_HOME"|wc -l`
JDK=`cat /etc/profile|grep "JAVA_HOME="|cut -d"=" -f2|awk -F"/" '{print $4}'`
if [ $NUM -ne 0 ];then
    /bin/sed -i 's#'$JDK'#jdk1.7.0_80#g' /etc/profile
else
    echo "JAVA_HOME=/usr/java/jdk1.7.0_80" >> /etc/profile
    echo "JAVA_BIN=/usr/java/jdk1.7.0_80/bin" >> /etc/profile
    echo "PATH=/usr/lib64/qt-3.3/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin:/bin" >> /etc/profile
    echo "CLASSPATH=.:/lib/dt.jar:/lib/tools.jar" >> /etc/profile
    echo "export JAVA_HOME JAVA_BIN PATH CLASSPATH" >> /etc/profile
fi
   
source /etc/profile
   
   
--------------------java8安裝管理模塊--------------------
[root@puppet01 files]# cd /etc/puppet/modules/java8
[root@puppet01 java8]# ls
files  manifests
[root@puppet01 java8]# cd manifests/
[root@puppet01 manifests]# ls
init.pp  install.pp
[root@puppet01 manifests]# cat init.pp
class java8 {
  include java8::install
}
[root@puppet01 manifests]# cat install.pp
class java8::install {
  file { "/data/software/java-jdk8_install.sh":
    source => "puppet:///modules/java8/java-jdk8_install.sh",
    owner => root,
    group => root,
    mode => 0755
    }
   
  exec { "install jdk":
    cwd => "/data/software",
    command => "/bin/bash java-jdk8_install.sh",
    user => "root",
    group => "root",
    path =>["/usr/bin:/usr/sbin:/bin:/sbin"],
    creates =>"/usr/java/jdk1.8.0_131",
    require =>File["/data/software/java-jdk8_install.sh"]
    }
}
[root@puppet01 manifests]# cat ../files/java-jdk8_install.sh
#!/bin/bash
   
/bin/rpm -qa|grep jdk|xargs rpm -e
   
# install jdk8 jdk7
/bin/rpm -ivh  http://yum.wang.com/software/jdk-8u131-linux-x64.rpm
   
# set env
NUM=`cat /etc/profile|grep "JAVA_HOME"|wc -l`
JDK=`cat /etc/profile|grep "JAVA_HOME="|cut -d"=" -f2|awk -F"/" '{print $4}'`
if [ $NUM -ne 0 ];then
    /bin/sed -i 's#'$JDK'#jdk1.8.0_131#g' /etc/profile
else
    echo "JAVA_HOME=/usr/java/jdk1.8.0_131" >> /etc/profile
    echo "JAVA_BIN=/usr/java/jdk1.8.0_131/bin" >> /etc/profile
    echo "PATH=/usr/lib64/qt-3.3/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin:/bin" >> /etc/profile
    echo "CLASSPATH=.:/lib/dt.jar:/lib/tools.jar" >> /etc/profile
    echo "export JAVA_HOME JAVA_BIN PATH CLASSPATH" >> /etc/profile
fi
   
source /etc/profile
   
--------------------tomcat8安裝管理模塊--------------------
[root@puppet01 manifests]# cd /etc/puppet/modules/tomcat8/
[root@puppet01 tomcat8]# ls
files  manifests
[root@puppet01 tomcat8]# cd manifests/
[root@puppet01 manifests]# ls
init.pp  install.pp
[root@puppet01 manifests]# cat init.pp
class tomcat8 {
  include tomcat8::install
}
   
[root@puppet01 manifests]# cat install.pp
class tomcat8::install {
  file { "/data/software/apache-tomcat-8.5.15.tar.gz":
  source =>"puppet:///modules/tomcat8/apache-tomcat-8.5.15.tar.gz",
  owner => "root",
  group => "root",
  mode => 755
  }
   
  exec {"install tomcat":
  cwd => "/data/software",
  command => "/bin/tar -zvxf apache-tomcat-8.5.15.tar.gz && mv apache-tomcat-8.5.15 /data/tomcat",
  user => "root",
  group => "root",
  path =>["/usr/bin:/usr/sbin:/bin:/sbin"],
  creates => "/data/tomcat",
  require => File["/data/software/apache-tomcat-8.5.15.tar.gz"]
  }
}
[root@puppet01 manifests]# ls ../files/
apache-tomcat-8.5.15.tar.gz
   
--------------------nginx安裝管理模塊--------------------
[root@puppet01 manifests]# cd /etc/puppet/modules/nginx/
[root@puppet01 nginx]# ls
files  manifests
[root@puppet01 nginx]# cd manifests/
[root@puppet01 manifests]# ls
init.pp  install.pp
[root@puppet01 manifests]# cat init.pp
class nginx {
  include nginx::install
}
[root@puppet01 manifests]# cat install.pp
class nginx::install {
  file { "/data/software/nginx1.10_install.sh":
  source =>"puppet:///modules/nginx/nginx1.10_install.sh",
  owner => "root",
  group => "root",
  mode => 755
  }
   
  exec {"install nginx":
  cwd => "/data/software",
  command => "/bin/bash -x nginx1.10_install.sh",
  user => "root",
  group => "root",
  path =>["/usr/bin:/usr/sbin:/bin:/sbin"],
  creates => "/data/nginx/conf/nginx.conf",
  require => File["/data/software/nginx1.10_install.sh"]
  }
}
[root@puppet01 manifests]# cat ../files/nginx1.10_install.sh
#!/bin/bash
#基礎環境准備
/usr/sbin/groupadd -r nginx
/usr/sbin/useradd -r -g nginx -s /bin/false -M nginx
/usr/bin/yum install -y pcre pcre-devel openssl openssl-devel gcc
   
#編譯安裝nginx1.10
cd /data/software/
/usr/bin/wget http://yum.wang.com/software/nginx-1.10.3.tar.gz
/bin/tar -zvxf nginx-1.10.3.tar.gz
cd nginx-1.10.3
./configure --prefix=/data/nginx --user=nginx --group=nginx --with-http_ssl_module --with-http_flv_module --with-http_stub_status_module --with-http_gzip_static_module --with-pcre
make && make install
   
#配置nginx
cp /data/nginx/conf/nginx.conf /data/nginx/conf/nginx.conf.bak
> /data/nginx/conf/nginx.conf
   
cat > /data/nginx/conf/nginx.conf << EOF
user  nobody;
worker_processes  8;
    
#error_log logs/error.log;
#error_log logs/error.log notice;
#error_log logs/error.log info;
    
events {
    worker_connections  65535;
}
      
http {
    server_tokens off;
    include       mime.types;
    default_type  application/octet-stream;
    charset utf-8;
     
    log_format  main  '$http_x_forwarded_for $remote_addr $remote_user [$time_local] "$request" '
                      '$status $body_bytes_sent "$http_referer" '
                      '"$http_user_agent" "$http_cookie" $host $request_time';
    sendfile       on;
    tcp_nopush     on;
    tcp_nodelay    on;
    keepalive_timeout  65;
     
     
    fastcgi_connect_timeout 3000;
    fastcgi_send_timeout 3000;
    fastcgi_read_timeout 3000;
    fastcgi_buffer_size 256k;
    fastcgi_buffers 8 256k;
    fastcgi_busy_buffers_size 256k;
    fastcgi_temp_file_write_size 256k;
    fastcgi_intercept_errors on;
      
         
    client_header_timeout 600s;
    client_body_timeout 600s;
      
    client_max_body_size 100m;  
    client_body_buffer_size 256k;     
   ## support more than 15 test environments    server_names_hash_max_size 512;    server_names_hash_bucket_size 128;
    gzip  on;
    gzip_min_length  1k;
    gzip_buffers     4 16k;
    gzip_http_version 1.1;
    gzip_comp_level 9;
    gzip_types       text/plain application/x-javascript text/css application/xml text/javascript application/x-httpd-php;
    gzip_vary on;
      
     
    include vhosts/*.conf;
}
EOF
   
/bin/mkdir /data/nginx/conf/vhosts
   
cat > /data/nginx/conf/vhosts/test.conf << EOF
server {
    listen       80;
    server_name  localhost;
    access_log  logs/access.log;
    error_log   logs/error.log;
   
 location / {
   root html;
   index index.php index.html index.htm;
   }
}
EOF
   
/data/nginx/sbin/nginx
   
   
--------------------motd文件管理模塊--------------------
[root@puppet01 manifests]# cd /etc/puppet/modules/motd/
[root@puppet01 motd]# ls
files  manifests
[root@puppet01 motd]# cd manifests/
[root@puppet01 manifests]# ls
config.pp  init.pp  install.pp
[root@puppet01 manifests]# cat init.pp
class motd {
  include motd::config
  include motd::install
  }
[root@puppet01 manifests]# cat install.pp
class motd::install {
  package{'setup':
  ensure => present,
  }
}
[root@puppet01 manifests]# cat config.pp
class motd::config {
  file { "/etc/motd":
    ensure => present,
    owner => "root",
    group => "root",
    mode => 0644,
    source => "puppet:///modules/motd/motd",
    require => Class["motd::install"],
    }
}
[root@puppet01 manifests]# ls ../files/motd
../files/motd
   
--------------------dns文件管理模塊--------------------
[root@puppet01 manifests]# cd /etc/puppet/modules/dns/
[root@puppet01 dns]# ls
files  manifests
[root@puppet01 dns]# cd manifests/
[root@puppet01 manifests]# ls
config.pp  init.pp
[root@puppet01 manifests]# cat init.pp
class dns {
  include dns::config
  }
[root@puppet01 manifests]# cat config.pp
class dns::config {
  file { "/etc/resolv.conf":
    ensure => present,
    owner => "root",
    group => "root",
    mode => 0644,
    source => "puppet:///modules/dns/resolv.conf",
    }
}
[root@puppet01 manifests]# cat ../files/resolv.conf
search wang.com
nameserver 192.168.1.27
nameserver 192.168.1.28
   
--------------------chrony時間同步文件管理模塊--------------------
[root@puppet01 manifests]# cd /etc/puppet/modules/chrony/
[root@puppet01 chrony]# ls
files  manifests
[root@puppet01 chrony]# cd manifests/
[root@puppet01 manifests]# ls
init.pp  install.pp
[root@puppet01 manifests]# cat init.pp
class chrony {
  include chrony::install
  }
[root@puppet01 manifests]# cat install.pp
class chrony::install {
  file { "/data/software/chrony.sh":
  source =>"puppet:///modules/chrony/chrony.sh",
  owner => "root",
  group => "root",
  mode => 755
  }
   
  exec {"install chrony":
  cwd => "/data/software",
  command => "/bin/bash -x chrony.sh",
  user => "root",
  group => "root",
  path =>["/usr/bin:/usr/sbin:/bin:/sbin"],
  creates => "/etc/chrony.conf",
  require => File["/data/software/chrony.sh"]
  }
}
[root@puppet01 manifests]# cat ../files/chrony.sh
#!/bin/bash
/etc/init.d/ntpd stop
/usr/bin/yum install chrony -y
cp /etc/chrony.conf /etc/chrony.conf.bak
rm -f /etc/chrony.conf
wget http://yum.wang.com/software/chrony.conf
cp -f chrony.conf /etc/
/etc/init.d/chronyd start
/usr/bin/chronyc sources -v
   
--------------------yum文件管理模塊--------------------
[root@puppet01 manifests]# cd /etc/puppet/modules/yum/
[root@puppet01 yum]# ls
files  manifests
[root@puppet01 yum]# cd manifests/
[root@puppet01 manifests]# ls
config.pp  init.pp
[root@puppet01 manifests]# cat init.pp
class yum {
  include yum::config
  }
[root@puppet01 manifests]# cat config.pp
class yum::config {
  file { "/data/software/yum.sh":
    source => "puppet:///modules/yum/yum.sh",
    owner => "root",
    group => "root",
    mode => 0755,
    }
   
  exec { "set yum":
    cwd => "/data/software",
    command => "/bin/bash yum.sh",
    user => "root",
    group => "root",
    path =>["/usr/bin:/usr/sbin:/bin:/sbin"],
    unless => "grep mirrors.wang.com /etc/yum.repos.d/CentOS-Base.repo",           #當這個結果為假的時候才執行這個命令。如果結果為真，就停止執行這個命令。
    require =>File["/data/software/yum.sh"]
    }
}
   
[root@puppet01 manifests]# cat ../files/yum.sh
#!/bin/bash
   
rm -f  /etc/yum.repos.d/*.repo
    
wget http://yum.wang.com/software/CentOS-Base.repo -O /etc/yum.repos.d/CentOS-Base.repo
wget http://yum.wang.com/software/epel.repo    -O /etc/yum.repos.d/epel.repo
#wget http://yum.wang.com/software/mongodb.repo
   
yum clean all
yum makecache
 
--------------------resolv文件管理模塊--------------------
[root@puppet ~]# ls /etc/puppet/modules/
chrony  dns  java7  java8  motd  nginx  postfix  resolv  ssh  sudo  tomcat8  yum
[root@puppet ~]# cd /etc/puppet/modules/resolv/manifests/
[root@puppet manifests]# ls
config.pp  init.pp
[root@puppet manifests]# cat init.pp
class resolv {
  include resolv::config
  }
class resolv01 {
  include resolv::dns01
  }
class resolv02 {
  include resolv::dns02
  }
[root@puppet manifests]# cat config.pp
class resolv::config {
  file { "/etc/resolv.conf":
    source => "puppet:///modules/resolv/resolv.conf",
    ensure => "present",
    owner  => "root",
    group  => "root",
    mode   => 0644,
    }
}
 
[root@puppet manifests]# cat ../files/resolv.conf
search wang.com
nameserver 192.168.1.27
nameserver 192.168.1.28
options timeout:1
options attempts:1
   
--------------------postfix安裝管理模塊--------------------
[root@puppet01 manifests]# cd /etc/puppet/modules/postfix/
[root@puppet01 postfix]# ls manifests/
config.pp  init.pp  install.pp  service.pp
[root@puppet01 postfix]# ls files/
master.cf
[root@puppet01 postfix]# ls templates/
main.cf.erb
[root@puppet01 postfix]# cat manifests/init.pp
class postfix {
  include postfix::install
  include postfix::config
  include postfix::service
}
[root@puppet01 postfix]# cat manifests/install.pp
class postfix::install {
  package { ["postfix","mailx" ]:
    ensure => present,
  }
}
[root@puppet01 postfix]# cat manifests/config.pp
class postfix::config {
  File {
    owner => 'postfix',
    group => 'postfix',
    mode => 0644,
    }
   
  file {'/etc/postfix/master.cf':
    ensure => present,
    source => 'puppet:///modules/postfix/master.cf',
    require => Class['postfix::install'],
    notify => Class['postfix::service'],
    }
   
  file {'/etc/postfix/main.cf':
    ensure => present,
    content => template('postfix/main.cf.erb'),
    require => Class['postfix::install'],
    notify => Class['postfix::service'],
    }
}
[root@puppet01 postfix]# cat manifests/service.pp
class postfix::service {
  service { 'postfix':
    ensure     => running,
    hasstatus  => true,
    hasrestart => true,
    enable     => true,
    require    => Class['postfix::config'],
    }
}
   
[root@puppet01 postfix]# cat templates/main.cf.erb
soft_bounce = no
command_directory = /usr/sbin
daemon_directory = /usr/libexec/postfix
mail_owner = postfix
myhostname = <%= @hostname %>               
mydomain = <%= @domain %>
myorigin = $mydomain
mydestination = $myhostname,localhost.$mydomain,localhost,$mydomain
unknown_local_recipient_reject_code = 550
relay_domains = $mydestination
smtpd_reject_unlisted_recipient = yes
unverified_recipient_reject_code = 500
smtpd_banner = $myhostname ESMTP
setgid_group = postdrop
   
[root@puppet01 postfix]# ls files/master.cf
files/master.cf
   
#注意：模板里的變量通過ERB語法從Facter的fact中獲取值。fact的名稱放在有<%=和%>組成的ERB括號里，在Puppet運行時，它們將被替代為Fact的實際值（即agent端的實際值）。
   
--------------------------------------------------------------------------------------------------
   
然后在/etc/puppet/manifests/site.pp清單文件中引用這些類：
[root@puppet manifests]# cat /etc/puppet/manifests/site.pp
class base {
  include chrony
  include java8
  include tomcat8
  include nginx
  include yum
  include resolv
  }
 
node 'puppet02.bkjk.cn' {
  include dns
  include yum
  }
 
node 'dns01' {
  #include dns
  include yum
  include ssh
  include resolv
  }
 
node 'dns02' {
  #include dns
  include yum
  include ssh
  include resolv
  }
 
node 'mirrors' {
  include yum
  include ssh
  include resolv
  }
 
上面的dns01、dns02、mirrors都是通過內網DNS解析的。
[root@puppet manifests]# ping mirrors
PING mirrors.wang.com (192.168.1.240) 56(84) bytes of data.
64 bytes from yum.wang.com (192.168.1.240): icmp_seq=1 ttl=64 time=0.889 ms
......
   
--------------------------------------------------------------------------------------------------
   
最后在puppet agent端連接puppet master，進行應用同步管理。
[root@puppet02 ~]# puppet agent --test --server=puppet01.wang.com
Notice: Ignoring --listen on onetime run
Info: Retrieving pluginfacts
Info: Retrieving plugin
Info: Caching catalog for puppet02.wang.com
Info: Applying configuration version '1501429243'
Notice: /Stage[main]/Chrony::Install/File[/data/software/chrony.sh]/ensure: defined content as '{md5}fe7f9787a7cae33ed0e00c26f880b145'
Notice: /Stage[main]/Chrony::Install/Exec[install chrony]/returns: executed successfully
........
   
執行成功后，在puppet agent節點機器上進行驗證。后續再對這些應用配置進行管理時，只需在puppet master進行維護操作，puppet agent端會自動進行同步管理的。

------------------------------------------------------------------------------------------------------
[root@puppet dns]# puppet agent -t       #puppet服務端測試連接
[root@puppet dns]# puppet agent --help

配置說明：
class source::exec2{
  exec { "install nginx":
    cwd       =>"/tmp/rhel5/nginx",  #目錄存在的情況下執行command
    command   =>"tar -zxvf nginx-0.8.42.tar.gz && cd nginx-0.8.42 &&./configure --user=nginx --group=nginx --prefix=/usr/local/nginx --without-http-cache && make&&make install",  
    path      => ["/usr/bin","/usr/sbin","/bin","/sbin"],
    logoutput => on_failure,  
    unless    => "/bin/ls /usr/local/nginx/conf",        #命令返回值不為0的情況下執行commond
    require   => Class[source::file1,source::user]
    notify    => Class["source::exec3"],
  }

[root@puppet dns]# /bin/ls /data/nginx/conf/nginx.conf
/data/nginx/conf/nginx.conf
[root@puppet dns]# echo $?
0