PRE-INSTALL
=============================================================
kvm相關安裝包及其作用
qemu-kvm 主要的KVM程序包
python-virtinst 創建虛擬機所需要的命令行工具和程序庫
virt-manager GUI虛擬機管理工具
virt-top 虛擬機統計命令
virt-viewer GUI連接程序，連接到已配置好的虛擬機
libvirt C語言工具包，提供libvirt服務
libvirt-client 為虛擬客戶機提供的C語言工具包
virt-install 基於libvirt服務的虛擬機創建命令
bridge-utils 創建和管理橋接設備的工具
INSTALL
=============================================================
[root@localhost ~]# yum install qemu-kvm libvirt virt-install bridge-utils
#查看是否加載kvm模塊
[root@kvm ~]# lsmod|grep kvm
kvm_intel 138567 0
kvm 441119 1 kvm_intel
#如果沒有這兩條，可以用"modprobe kvm"加載；
#相關命令"insmod;rmmod;modinfo"
#啟動libvirtd
[root@localhost ~]# systemctl start libvirtd;systemctl enable libvirtd
[root@localhost ~]# systemctl list-unit-files|grep libvirtd
libvirtd.service enabled
NETWORK CONFIGURATION
=============================================================
#修改網卡文件eno16777736
[root@kvm ~]# cd /etc/sysconfig/network-scripts/
[root@kvm network-scripts]# echo "BRIDGE=br0" >> ifcfg-eno16777736 #在ifcfg-e**原網卡文件中增加"BRIDGE=br0"
#新建網橋文件ifcfg-br0(網橋名稱),增加內容如下
[root@kvm network-scripts]# vi ifcfg-br0
*************************************************
DEVICE=br0
TYPE="Bridge" #大小寫敏感，所以必須是Bridge
BOOTPROTO="dhcp"
ONBOOT="yes"
DELAY="0"
STP="yes" #這一行是來啟動STP,和brctl命令行出來的結果有關
*************************************************
#重啟NetworkManager及network服務：
[root@kvm network-scripts]# systemctl restart NetworkManager
#當你手動修改了網卡文件后，需要重啟NetworkManager服務來重新接管網絡配置
#網卡配置文件和NetworkManager配置沖突時，解決方案:｛1、重啟NetworkManager;2、關閉NetworkManager｝
[root@kvm network-scripts]# systemctl restart network
[root@kvm network-scripts]# ip a #ip命令用來查看和管理ip信息
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno16777736: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UP qlen 1000
link/ether 00:0c:29:61:5c:1d brd ff:ff:ff:ff:ff:ff
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN
link/ether 52:54:00:b6:45:5b brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 500
link/ether 52:54:00:b6:45:5b brd ff:ff:ff:ff:ff:ff
6: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
link/ether 00:0c:29:61:5c:1d brd ff:ff:ff:ff:ff:ff
inet 192.168.0.32/24 brd 192.168.0.255 scope global dynamic br0
valid_lft 11979sec preferred_lft 11979sec
inet6 fe80::20c:29ff:fe61:5c1d/64 scope link
valid_lft forever preferred_lft forever
7: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UNKNOWN qlen 500
link/ether fe:54:00:cb:63:b2 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc54:ff:fecb:63b2/64 scope link
valid_lft forever preferred_lft forever
#查看網橋連接
[root@kvm network-scripts]# brctl show #brctl是一個網橋連接管理命令
bridge name bridge id STP enabled interfaces #如果上面不設置STP=yes，這里就會顯示no
br0 8000.000c29615c1d yes eno16777736
vnet0
virbr0 8000.525400b6455b yes virbr0-nic
CLOSE SELINUX
=============================================================
[root@kvm network-scripts]# setenforce 0
[root@kvm network-scripts]# getenforce
Permissive
[root@kvm network-scripts]#vi /etc/selinux/config
******************************************
SELINUX=permissive #修改配置文件使其永久生效
******************************************
CREATE A VM
=============================================================
[root@kvm ~]# mkdir -p /var/kvm/images
[root@kvm ~]# virt-install \
--network bridge:br0 \
--name vm1 \
--ram=1024 \
--vcpus=1 \
--disk path=/var/kvm/images/vm1.img,size=10 \
--graphics none \
--location 'http://ftp.iij.ad.jp/pub/linux/centos/7/os/x86_64/' \
--extra-args="console=tty0 console=ttyS0,115200"
#詳細每個參數的意義可以查看擴展資料
#安裝過程會讓你選擇textmode 還是vnc,選擇textmode繼續安裝吧
#如果網絡會有問題的話，盡量選擇用--cdrom /path/to/centos7.iso
#virt-install --name vm1 --ram=1024 --vcpus=1 --network bridge:br0 --disk path=/var/kvm/images/centos7.img,size=10 --graphics none --location=http://ftp.iij.ad.jp/pub/linux/centos/7/os/x86_64/ --extra-args="console=tty0 console=ttyS0,115200"
PS:圖形化下安裝虛擬機需要X-WINDOW和virt-manager，安裝虛擬機之前的操作都一樣，圖形下操作很簡單
擴展資料
=============================================================
http://wiki.centos.org/zh/HowTos/KVM
http://techlinux.net/2014/09/kvm-centos-7/
http://www.server-world.info/en/note?os=CentOS_7&p=kvm&f=2
本文出自 “三零妖人” 博客，請務必保留此出處http://301ren.blog.51cto.com/8887653/1631133
