android客服端+eps8266+單片機+路由器之遠程控制系統

用android客服端+eps8266+單片機+路由器做了一個遠程控制的系統，因為自己是在實驗室里，所以把實驗室的門，燈做成了遠程控制的。

控制距離有多遠------只能說很遠很遠，只要你手機能上網的地方，不對應該是只要能打電話的地方，不對應該是只要是移動網（我用的是移動的卡）覆蓋的地方，

這篇只說明怎么樣才能實現遠程通信（在路由器上怎樣設置，wifi模塊eps8266怎樣設置），最后會貼上單片機，android的源碼

請事先參考我的前幾篇文章

 

實現遠程最好用這兩種

 http://www.cnblogs.com/yangfengwu/p/7736296.html

 http://www.cnblogs.com/yangfengwu/p/8175080.html

最新的學習文章

http://www.cnblogs.com/yangfengwu/category/1187355.html   (持續更新中)

 

http://www.cnblogs.com/yangfengwu/category/1099910.html    (不確定更新)

 

android之WIFI小車編程詳述，

android 之TCP客戶端編程

ESP8266使用詳解

 

有人的設置方法介紹

http://www.usr.cn/Faq/146.html

http://www.usr.cn/Faq/148.html

 

另外

在ESP8266使用詳解中介紹過它的連接路由器的模式，讓它連接上路由器后需要做一些設置

 

 

我做的手機tcp客服端

 

關於上面的遠程 與 近程連接

遠程連接：

當手機是2G，3G，4G上網的時候，或者，連接了wifi模塊所連接的路由器的時候，或者所連接的路由器橋接了wifi模塊所連接的路由器。

遠程連接服務器ip是路由器的公網ip

 

對於通信端口號是設置wifi模塊所監聽的端口號（它通信的端口號）

unsigned char code CIPSERVER[]="AT+CIPSERVER=1,10000\r\n";//開啟服務器模式，端口號10000

 近程連接：

因為我設置了wifi模塊AP 兼 Station 模式，所以模塊會發出無線信號，我連接它的wifi信號也能完成通信，只不過連接它的wifi信號后，要連接的ip地址為192.168.4.1

好了附上單片機程序，本來我設置了返回數據，但是因為我的燈和門並沒有加檢測所以后來就去掉了

#define _MAIN_C_
#include "include.h"
sbit L1 = P1^0;
sbit L2 = P1^1;
sbit L3 = P1^2;
sbit L4 = P1^3;
sbit kaiguan = P1^4;
sbit led1 = P1^5;
sbit led2 = P1^6;
//AP
unsigned char code CWMODE2[]="AT+CWMODE=2\r\n";     //設置模塊的工作的模式為AP模式

//多連接ap+station模式
unsigned char code CWMODE3[]="AT+CWMODE=3\r\n";     //設置模塊的工作的模式為ap+station模式
unsigned char code CWJAP[]="AT+CWJAP=\"TP-LINK_9750\",\"56565888\"\r\n";//設置連接的路由器

unsigned char code RST[]="AT+RST\r\n";                     //重啟模塊使AT+CWMODE模式生效
unsigned char code CIPMUX[]="AT+CIPMUX=1\r\n";            //啟動多連接
unsigned char code CIPSERVER[]="AT+CIPSERVER=1,10000\r\n";//開啟服務器模式，端口號10000
//微秒延時
/*
void us_delay(unsigned char t) 
{  
    while(t--); 
} */
//ms秒延時
void Delay_ms(unsigned long ms)
{
    unsigned char i, j,k;
    for(k=0;k<ms;k++)
    {
        _nop_();
        _nop_();
        i = 22;
        j = 128;
        do
        {
            while (--j);
        } while (--i);
    }
}
void delay1s(void)   //誤差 -0.00000000024us
{
    unsigned char a,b,c;
    for(c=95;c>0;c--)
        for(b=26;b>0;b--)
            for(a=185;a>0;a--);
}
//ESP8266設置
void ESP8266_Set(unsigned char *puf)
{
    while(*puf!='\0')
    {
        Send_Uart(*puf);
        puf++;
    }
}

//多連接AP模式
void ManyConnect_AP()
{
    P1=0xff;
    //模式ap
    while(1)
    {
        ESP8266_Set(CWMODE2);//返回ok
        delay1s();
        if(Usart_AT_flage ==1)
        {
            if(strstr(Usart_Receive, "OK") )
            {
                Usart_AT_flage = 0;
                L1 = 0;
                break;
            }                
        }
  }
    //復位
    ESP8266_Set(RST);//返回一大溜，不用判斷返回
    delay1s();
    delay1s();
    //多連接
    while(1)
    {
        ESP8266_Set(CIPMUX);//返回ok
        delay1s();
        if(Usart_AT_flage ==1)
        {
            if(strstr(Usart_Receive, "OK") )
            {
                Usart_AT_flage = 0;
                L2 = 0;
                break;
            }                
        }
  }
    //啟動TCP服務
    while(1)
    {
        ESP8266_Set(CIPSERVER);//返回ok，多了也返回ok
        delay1s();
        if(Usart_AT_flage ==1)
        {
            if(strstr(Usart_Receive, "OK") )
            {
                Usart_AT_flage = 0;
                L3 = 0;
                break;
            }                
        }
  }
}

//多連接AP+Station 模式
void ManyConnect_ap_Station()
{
    P1=0xff;
    //模式3
    while(1)
    {
        ESP8266_Set(CWMODE3);//返回ok
        delay1s();
        if(Usart_AT_flage ==1)//接收完成
        {
            if(strstr(Usart_Receive, "OK") )
            {
                Usart_AT_flage = 0;
                L1 = 0;
                break;
            }                
        }
  }
    //連接路由
    while(1)
    {
        //復位
        ESP8266_Set(RST);//返回一大溜，不用判斷返回
        delay1s();
        delay1s();
        delay1s();
        delay1s();
        ESP8266_Set(CWJAP);//返回ok
        delay1s();
        delay1s();
        delay1s();
        delay1s();
        delay1s();
        delay1s();
        delay1s();
        delay1s();
        delay1s();
        delay1s();
        delay1s();
        delay1s();
        delay1s();
        delay1s();
        if(Usart_AT_flage ==1)
        {
            if(strstr(Usart_Receive, "OK") )
            {
                Usart_AT_flage = 0;
                L2 = 0;
                break;
            }    
        }
  }
    //多連接
    while(1)
    {
        ESP8266_Set(CIPMUX);//返回ok
        delay1s();
        if(Usart_AT_flage ==1)
        {
            if(strstr(Usart_Receive, "OK") )
            {
                Usart_AT_flage = 0;
                L3 = 0;
                break;
            }                
        }
  }
    //啟動TCP服務
    while(1)
    {
        ESP8266_Set(CIPSERVER);//返回ok，多了也返回ok
        delay1s();
        if(Usart_AT_flage ==1)
        {
            if(strstr(Usart_Receive, "OK") )
            {
                Usart_AT_flage = 0;
                L4 = 0;
                break;
            }                
        }
  }
}

void delay1s500ms(void)   //誤差 -0.000000000341us
{
    unsigned char a,b,c;
    for(c=123;c>0;c--)
        for(b=212;b>0;b--)
            for(a=25;a>0;a--);
}

void main()
{
    int i;
    InitUART();
    while(1)
    {
        //ManyConnect_AP();//多連接AP模式
        ManyConnect_ap_Station();//多連接AP+station模式
        while(1)
        {
            //由於消息的開頭是+IP  故做此判斷，00000000000000000號
            if((Usart_Receive[0]=='+')&&(Usart_Receive[1]=='I')&&(Usart_Receive[2]=='P'))
            {
                if((Usart_Receive[3]=='D')&&(Usart_Receive[5]=='0')&&(Usart_Receive[6]==','))
                {
                    if(Usart_Receive[9]=='1')
                    {
                        kaiguan = 0;
                        delay1s500ms();
                        kaiguan = 1;
                        delay1s();
                        for(i = 0 ; i<20; i++)
                        {
                            Usart_Receive[i]=' ';
                        }
                        
                        //ESP8266_Set("AT+CIPSEND=0,1\r\n");
                        //delay1s();
                        //ESP8266_Set("1");//向服務器發送數據
                        
                        //delay1s();
                        //ESP8266_Set("AT+CIPSEND=0,1\r\n");
                        //delay1s();
                        //ESP8266_Set("1");//向服務器發送數據
                    }
                    if(Usart_Receive[9]=='2')
                    {
                        kaiguan = 0;
                        delay1s500ms();
                        kaiguan = 1;
                        delay1s();
                        for(i = 0 ; i<20; i++)
                        {
                            Usart_Receive[i]=' ';
                        }
                        //ESP8266_Set("AT+CIPSEND=0,1\r\n");
                        //delay1s();
                        //ESP8266_Set("2");//向服務器發送數據
                        
                        //delay1s();
                        //ESP8266_Set("AT+CIPSEND=0,1\r\n");
                        //delay1s();
                        //ESP8266_Set("2");//向服務器發送數據
                    }
                    if(Usart_Receive[9]=='3')
                    {
                        led1 = 0;
                        delay1s();
                        delay1s();
                        //ESP8266_Set("AT+CIPSEND=0,1\r\n");
                        //delay1s();
                        //ESP8266_Set("3");//向服務器發送數據
                        
                        //ESP8266_Set("AT+CIPSEND=0,1\r\n");
                        //delay1s();
                        //ESP8266_Set("3");//向服務器發送數據
                    }
                    if(Usart_Receive[9]=='4')
                    {
                        led1 = 1;
                        delay1s();
                        delay1s();
                        /*
                        ESP8266_Set("AT+CIPSEND=0,1\r\n");
                        delay1s();
                        ESP8266_Set("4");//向服務器發送數據
                        
                        ESP8266_Set("AT+CIPSEND=0,1\r\n");
                        delay1s();
                        ESP8266_Set("4");//向服務器發送數據*/
                    }
                    if(Usart_Receive[9]=='5')
                    {
                        led2 = 0;
                        delay1s();
                        delay1s();
                        /*
                        ESP8266_Set("AT+CIPSEND=0,1\r\n");
                        delay1s();
                        ESP8266_Set("5");//向服務器發送數據
                        
                        ESP8266_Set("AT+CIPSEND=0,1\r\n");
                        delay1s();
                        ESP8266_Set("5");//向服務器發送數據/*/
                    }
                    if(Usart_Receive[9]=='6')
                    {
                        led2 = 1;
                        delay1s();
                        delay1s();
                        /*
                        ESP8266_Set("AT+CIPSEND=0,1\r\n");
                        delay1s();
                        ESP8266_Set("6");//向服務器發送數據
                        
                        ESP8266_Set("AT+CIPSEND=0,1\r\n");
                        delay1s();
                        ESP8266_Set("6");//向服務器發送數據*/
                    }
                }
            }
                //由於消息的開頭是+IP  故做此判斷，111111111111111111111號
            if((Usart_Receive[0]=='+')&&(Usart_Receive[1]=='I')&&(Usart_Receive[2]=='P'))
            {
                if((Usart_Receive[3]=='D')&&(Usart_Receive[5]=='1')&&(Usart_Receive[6]==','))
                {
                    if(Usart_Receive[9]=='1')
                    {
                        kaiguan = 0;
                        delay1s500ms();
                        kaiguan = 1;
                        delay1s();
                        for(i = 0 ; i<20; i++)
                        {
                            Usart_Receive[i]=' ';
                        }
                    }
                    if(Usart_Receive[9]=='2')
                    {
                        kaiguan = 0;
                        delay1s500ms();
                        kaiguan = 1;
                        delay1s();
                        for(i = 0 ; i<20; i++)
                        {
                            Usart_Receive[i]=' ';
                        }
                        
                    }
                    if(Usart_Receive[9]=='3')
                    {
                        led1 = 0;
                        
                        delay1s();delay1s();
                    }
                    if(Usart_Receive[9]=='4')
                    {
                        led1 = 1;
                        
                        delay1s();delay1s();
                    }
                    if(Usart_Receive[9]=='5')
                    {
                        led2 = 0;
                        
                        delay1s();delay1s();
                    }
                    if(Usart_Receive[9]=='6')
                    {
                        led2 = 1;
                        
                        delay1s();delay1s();
                    }
                }
            }
                //由於消息的開頭是+IP  故做此判斷，222222222222222號
            if((Usart_Receive[0]=='+')&&(Usart_Receive[1]=='I')&&(Usart_Receive[2]=='P'))
            {
                if((Usart_Receive[3]=='D')&&(Usart_Receive[5]=='2')&&(Usart_Receive[6]==','))
                {
                    if(Usart_Receive[9]=='1')
                    {
                        kaiguan = 0;
                        delay1s500ms();
                        kaiguan = 1;
                        delay1s();
                        for(i = 0 ; i<20; i++)
                        {
                            Usart_Receive[i]=' ';
                        }
                    }
                    if(Usart_Receive[9]=='2')
                    {
                        kaiguan = 0;
                        delay1s500ms();
                        kaiguan = 1;
                        delay1s();
                        for(i = 0 ; i<20; i++)
                        {
                            Usart_Receive[i]=' ';
                        }
                    }
                    if(Usart_Receive[9]=='3')
                    {
                        led1 = 0;
                        
                        delay1s();delay1s();
                    }
                    if(Usart_Receive[9]=='4')
                    {
                        led1 = 1;
                        
                        delay1s();delay1s();
                    }
                    if(Usart_Receive[9]=='5')
                    {
                        led2 = 0;
                        
                        delay1s();delay1s();
                    }
                    if(Usart_Receive[9]=='6')
                    {
                        led2 = 1;
                        
                        delay1s();delay1s();
                    }
                }
            }
                //由於消息的開頭是+IP  故做此判斷，00000000000000000號
            if((Usart_Receive[0]=='+')&&(Usart_Receive[1]=='I')&&(Usart_Receive[2]=='P'))
            {
                if((Usart_Receive[3]=='D')&&(Usart_Receive[5]=='3')&&(Usart_Receive[6]==','))
                {
                    if(Usart_Receive[9]=='1')
                    {
                        kaiguan = 0;
                        delay1s500ms();
                        kaiguan = 1;
                    delay1s();
                        for(i = 0 ; i<20; i++)
                        {
                            Usart_Receive[i]=' ';
                        }
                    }
                    if(Usart_Receive[9]=='2')
                    {
                        kaiguan = 0;
                        delay1s500ms();
                        kaiguan = 1;
                        delay1s();
                        for(i = 0 ; i<20; i++)
                        {
                            Usart_Receive[i]=' ';
                        }
                    }
                    if(Usart_Receive[9]=='3')
                    {
                        led1 = 0;
                        
                        delay1s();delay1s();
                    }
                    if(Usart_Receive[9]=='4')
                    {
                        led1 = 1;
                        
                        delay1s();delay1s();
                    }
                    if(Usart_Receive[9]=='5')
                    {
                        led2 = 0;
                        
                        delay1s();delay1s();
                    }
                    if(Usart_Receive[9]=='6')
                    {
                        led2 = 1;
                        
                        delay1s();delay1s();
                    }
                }
            }
                //由於消息的開頭是+IP  故做此判斷，444444444444444444號
            if((Usart_Receive[0]=='+')&&(Usart_Receive[1]=='I')&&(Usart_Receive[2]=='P'))
            {
                if((Usart_Receive[3]=='D')&&(Usart_Receive[5]=='0')&&(Usart_Receive[6]==','))
                {
                    if(Usart_Receive[9]=='1')
                    {
                        kaiguan = 0;
                        delay1s500ms();
                        kaiguan = 1;
                        delay1s();
                        for(i = 0 ; i<20; i++)
                        {
                            Usart_Receive[i]=' ';
                        }
                    }
                    if(Usart_Receive[9]=='2')
                    {
                        kaiguan = 0;
                        delay1s500ms();
                        kaiguan = 1;
                        delay1s();
                        for(i = 0 ; i<20; i++)
                        {
                            Usart_Receive[i]=' ';
                        }
                    }
                    if(Usart_Receive[9]=='3')
                    {
                        led1 = 0;
                        
                        delay1s();delay1s();
                    }
                    if(Usart_Receive[9]=='4')
                    {
                        led1 = 1;
                        
                    delay1s();delay1s();
                    }
                    if(Usart_Receive[9]=='5')
                    {
                        led2 = 0;
                        
                        delay1s();delay1s();
                    }
                    if(Usart_Receive[9]=='6')
                    {
                        led2 = 1;
                        
                        delay1s();delay1s();
                    }
                }
            }
            
        }
    }
}

#define _USART_C_
#include "include.h"
unsigned char Usart_Receive[20]={0};
unsigned char Usart_Cnt=0;
bit Usart_AT_flage;
bit flage;
bit Command_Flag;

void InitUART(void)
{
    TMOD = 0x20;
    SCON = 0x50;
    TH1 = 0xFD;
    TL1 = TH1;
    PCON = 0x00;
    EA = 1;
    ES = 1;
    TR1 = 1;
}

void Send_Uart(unsigned char value) 
{
    ES=0;  //關閉串口中斷  
    TI=0;   //清發送完畢中斷請求標志位   
    SBUF=value; //發送  
    while(TI==0); //等待發送完畢   
    TI=0;   //清發送完畢中斷請求標志位   
    ES=1;  //允許串口中斷  
}

void UARTInterrupt(void) interrupt 4
{
    if(RI)
    {
        RI=0;
        Usart_Receive[Usart_Cnt]=SBUF;//接收串口數據
        Usart_Cnt++;//
        //返回數據以回車結尾，有回車，而且數據個數大於2，說明接收到了數據
        if(Usart_Receive[Usart_Cnt-2]=='\r' && Usart_Receive[Usart_Cnt-1]=='\n' && Usart_Cnt >= 2)
        {
            Usart_Cnt = 0;//接收數據計數清零
            Usart_AT_flage = 1;//數據接收成功標志位
        }
        else if(Usart_Cnt > 20)//
        {
            Usart_Cnt = 0;
        }    
    }
}

 

 

#ifndef __USART_H_
#define __USART_H_


#ifndef _USART_C_
#define _USART_ex_ extern
#else
#define _USART_ex_
#endif

_USART_ex_ unsigned char Usart_Receive[20];
_USART_ex_ unsigned char Usart_Cnt;
_USART_ex_ bit Usart_AT_flage;
_USART_ex_ bit Command_Flag;
_USART_ex_ unsigned char UsartData;
_USART_ex_ void InitUART(void);//串口初始化
_USART_ex_ void Send_Uart(unsigned char value); 
#endif

#include <REGX52.H>
#include "USART.h"
#include <string.h>
#include <intrins.h>

完了，，，，，，，

android代碼

 

package com.laboratory_control.yang;

import java.io.InputStream;
import java.io.OutputStream;
import java.net.InetAddress;
import java.net.Socket;


import android.R.integer;
import android.R.string;
import android.app.Activity;
import android.app.AlertDialog;
import android.app.AlertDialog.Builder;
import android.content.DialogInterface;
import android.content.Intent;
import android.content.SharedPreferences;
import android.os.Bundle;
import android.preference.PreferenceManager;
import android.telephony.TelephonyManager;
import android.util.Log;
import android.view.KeyEvent;
import android.view.Menu;
import android.view.MenuItem;
import android.view.View;
import android.view.View.OnClickListener;
import android.widget.Button;
import android.widget.CheckBox;
import android.widget.EditText;
import android.widget.Toast;


public class MainActivity extends Activity {

    String imei;//手機imei號
    long long_mima;
    String string_mima;
    private SharedPreferences pref;
    private SharedPreferences.Editor editor;
    private CheckBox rememberpass;
    static Socket socket = null;//定義socket
    Button shenqing_button;//申請密鑰
    Button LandingButton;//登陸按鈕
    Button FarButton;//遠程連接按鈕
    Button NearButton;//進程連接按鈕
    EditText PasswordEditText;//密碼輸入框
    EditText FarIpEditText;//遠程ip輸入框
    EditText NearIpEditText;//近程ip輸入框
    EditText PortText;//定義端口輸入框
    static InputStream inputStream=null;//定義輸入流
    static OutputStream outputStream=null;//定義輸出流
    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.activity_main);
        pref = PreferenceManager.getDefaultSharedPreferences(this);
        rememberpass = (CheckBox) findViewById(R.id.cb_mima);
        
        shenqing_button = (Button) findViewById(R.id.shenqingButton);//申請密鑰
        LandingButton = (Button) findViewById(R.id.dengluButton);//登陸
        FarButton = (Button) findViewById(R.id.yuanButton);//遠程按鈕
        NearButton = (Button) findViewById(R.id.jinButton);//進程按鈕
        
        FarIpEditText = (EditText) findViewById(R.id.IPEditText);//遠程ip輸入框
        NearIpEditText = (EditText) findViewById(R.id.jinIPEditText);//進程ip輸入框
        PortText = (EditText) findViewById(R.id.PORTEditText);//通信端口
        PasswordEditText = (EditText) findViewById(R.id.mimaEditText);//登陸密碼
        
        boolean isRemember = pref.getBoolean("cb_mima", false);//得到cb_mima文件存的值，得不到會返回false
        if (isRemember) //如果上次選擇了保存密碼
        {
            //Toast.makeText(MainActivity.this, "123", Toast.LENGTH_SHORT).show();
            String password = pref.getString("password", "");//取出密碼
            PasswordEditText.setText(password);//把密碼輸入到密碼輸入框
            rememberpass.setChecked(true);//選中記住密碼
        }
        
        shenqing_button.setOnClickListener(shenqing_buttonListener);
        FarButton.setOnClickListener(FarButtonListener);//遠程監聽
        NearButton.setOnClickListener(NearButtonListener);//進程監聽
        LandingButton.setOnClickListener(LandingButtonListener);//登陸監聽
        
        /** 
         * 獲取IMEI號，IESI號，手機型號 
         */  
        getInfo();
        
        /**
         * 為完全退出應用程序而加的代碼
         */
        ExitApplication.getInstance().addActivity(this);
    }
    /**
     * 申請密鑰監聽
     */
    private OnClickListener shenqing_buttonListener = new OnClickListener() {
        
        @Override
        public void onClick(View v) {
            // TODO Auto-generated method stub
            Toast.makeText(MainActivity.this,"請把"+imei+"提供給管理員",Toast.LENGTH_LONG).show();
        }
    };
    /**
     * 遠程按鈕連接監聽
     */
    private OnClickListener FarButtonListener = new OnClickListener() {
        
        @Override
        public void onClick(View v) {
            // TODO Auto-generated method stub
            //啟動遠程連接線程
            FarConnect_Thread farconnect_Thread = new FarConnect_Thread();
            farconnect_Thread.start();
        }
    };
    /**
     * //近程按鈕連接監聽
     */
    private OnClickListener NearButtonListener = new OnClickListener() {
        
        @Override
        public void onClick(View v) {
            // TODO Auto-generated method stub
            NearConnect_Thread nearconnect_Thread = new NearConnect_Thread();
            nearconnect_Thread.start();
        }
    };
    /**
     * 
     * 近程連接線程
     *
     */
    class NearConnect_Thread extends Thread//繼承Thread
    {
        public void run()//重寫run方法
        {
            try 
            {
                if(true)
                //if (socket == null) 
                {
                    //用InetAddress方法獲取ip地址
                    InetAddress ipAddress = InetAddress.getByName(NearIpEditText.getText().toString());
                    int port =Integer.valueOf(PortText.getText().toString());//獲取端口號 
                    socket = new Socket(ipAddress, port);//創建連接地址和端口    
                    if (socket !=null) 
                    {
                        runOnUiThread(new Runnable()
                        {
                            public void run() 
                            {    
                                // TODO Auto-generated method stub
                                Toast.makeText(MainActivity.this,"已成功連接！", Toast.LENGTH_SHORT).show();
                            }                        
                        });
                    }
                }
                /*
                else
                {
                    runOnUiThread(new Runnable()
                    {
                        public void run() 
                        {    
                            // TODO Auto-generated method stub
                            Toast.makeText(MainActivity.this,"成功連接！輸入密碼后即可登陸", Toast.LENGTH_SHORT).show();
                        }                        
                    });
                }*/
            } 
            catch (Exception e) 
            {
                // TODO Auto-generated catch block
                e.printStackTrace();
            }
        }
    }
    /**
     * 
     * 遠程連接線程
     *
     */
        
    class FarConnect_Thread extends Thread//繼承Thread
    {
        public void run()//重寫run方法
        {
            try 
            {
                if(true)
                //if (socket == null) 
                {
                    //用InetAddress方法獲取ip地址
                    InetAddress ipAddress = InetAddress.getByName(FarIpEditText.getText().toString());
                    int port =Integer.valueOf(PortText.getText().toString());//獲取端口號 
                    socket = new Socket(ipAddress, port);//創建連接地址和端口    
                    if (socket !=null) 
                    {
                        runOnUiThread(new Runnable()
                        {
                            public void run() 
                            {    
                                // TODO Auto-generated method stub
                                Toast.makeText(MainActivity.this,"成功連接！輸入密碼后即可登陸", Toast.LENGTH_SHORT).show();
                            }                        
                        });
                    }
                }
                /*
                else
                {
                    runOnUiThread(new Runnable()
                    {
                        public void run() 
                        {    
                            // TODO Auto-generated method stub
                            Toast.makeText(MainActivity.this,"已經連接！", Toast.LENGTH_SHORT).show();
                        }                        
                    });
                }*/
            } 
            catch (Exception e) 
            {
                // TODO Auto-generated catch block
                e.printStackTrace();
            }
        }
    }
    /**
     * 登陸監聽，啟動控制Activity（活動）
     */
    private OnClickListener LandingButtonListener =  new OnClickListener() {
        
        @Override
        public void onClick(View v) {
            // TODO Auto-generated method stub
            //if(true)
            String password = PasswordEditText.getText().toString();//得到輸入框輸入的密碼
            
            if (socket !=null)//連接成功
            {
                if (PasswordEditText.getText().toString().equals(string_mima))//密碼正確 
                {
                     editor = pref.edit();
                     if (rememberpass.isChecked()) 
                     {
                        editor.putBoolean("cb_mima", true);
                        editor.putString("password", password);
                     }
                     else 
                     {
                         editor.clear();
                     }
                     editor.commit();
                     Intent intent = new Intent(); 
                     intent.setClass(MainActivity.this, Control.class);
                     MainActivity.this.startActivity(intent);
                }
                else 
                {
                    runOnUiThread(new Runnable()
                    {
                        public void run() 
                        {    
                            // TODO Auto-generated method stub
                            Toast.makeText(MainActivity.this,"已連接，請輸入正確密碼！", Toast.LENGTH_SHORT).show();
                        }                        
                    });
                }
            } 
            else 
            {
                runOnUiThread(new Runnable()
                {
                    public void run() 
                    {    
                        // TODO Auto-generated method stub
                        Toast.makeText(MainActivity.this,"請先連接！", Toast.LENGTH_SHORT).show();
                    }                        
                });
            }
        }
    };
    /**
     * 退出提示框
     */
    protected void dialog() { 
         AlertDialog.Builder builder = new Builder(MainActivity.this); 
         builder.setMessage("親，確定要退出嗎"); 
         builder.setTitle("提示"); 
         builder.setPositiveButton("確定", 
          new android.content.DialogInterface.OnClickListener() { 
           @Override
           public void onClick(DialogInterface dialog, int which) { 
           dialog.dismiss(); 
           MainActivity.this.finish(); 
           } 
          }); 
         builder.setNegativeButton("取消", 
          new android.content.DialogInterface.OnClickListener() { 
           @Override
           public void onClick(DialogInterface dialog, int which) { 
           dialog.dismiss(); 
           
           } 
          }); 
         builder.create().show(); 
        } 
        @Override
        public boolean onKeyDown(int keyCode, KeyEvent event) { 
         if (keyCode == KeyEvent.KEYCODE_BACK && event.getRepeatCount() == 0) { 
          dialog(); 
          return false; 
         } 
         return false; 
        }
        /** 
         * 獲取IMEI號，IESI號，手機型號 
         */  
        private void getInfo() {  
               TelephonyManager mTm = (TelephonyManager)this.getSystemService(TELEPHONY_SERVICE);  
               imei = mTm.getDeviceId(); 
               
               String aaaa = imei.substring(0,6);
               
               long_mima = Integer.parseInt(aaaa);
               long_mima = long_mima/3+666;//做運算當作登陸密碼
               string_mima = ""+long_mima;
               
               //String imsi = mTm.getSubscriberId();  
               //String mtype = android.os.Build.MODEL; // 手機型號  
               //String mtyb= android.os.Build.BRAND;//手機品牌  
               //String numer = mTm.getLine1Number(); // 手機號碼，有的可得，有的不可得  
               
               Log.i("text", "手機IMEI號："+imei);
               Log.i("456", string_mima);
           }  
}

<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
    xmlns:tools="http://schemas.android.com/tools"
    android:layout_width="match_parent"
    android:layout_height="match_parent"
    android:paddingBottom="@dimen/activity_vertical_margin"
    android:paddingLeft="@dimen/activity_horizontal_margin"
    android:paddingRight="@dimen/activity_horizontal_margin"
    android:paddingTop="@dimen/activity_vertical_margin"
    android:background="@drawable/dd2"
    tools:context="com.laboratory_control.yang.MainActivity" >

    <!-- IP地址 -->
    <TextView
        android:text="遠程連接服務器IP："
        android:id="@+id/IPTextView"
        android:layout_height="wrap_content"
        android:layout_width="wrap_content"
        android:textSize="20dp"
        
        />
    <!-- 遠程IP地址輸入框 -->
    <EditText 
        android:text=""
        android:id="@+id/IPEditText"
        android:layout_height="35dp"
        android:layout_width="match_parent"
        android:layout_marginTop="25dp"
        android:background="@android:color/white"
        />
     <!-- 近程IP地址 -->
    <TextView
        android:text="近程連接服務器IP："
        android:id="@+id/jinTextView"
        android:layout_height="wrap_content"
        android:layout_width="wrap_content"
        android:textSize="20dp"
        android:layout_marginTop="70dp"
        />
    <!-- 近程IP地址輸入框 -->
    <EditText 
        android:text="192.168.4.1"
        android:id="@+id/jinIPEditText"
        android:layout_height="35dp"
        android:layout_width="match_parent"
        android:layout_marginTop="95dp"
        android:background="@android:color/white"
        />
   
    <!-- 端口號 -->
    <TextView
        android:text="通信端口號："
        android:id="@+id/PORTTextView"
        android:layout_height="wrap_content"
        android:layout_width="wrap_content"
        android:textSize="20dp"
        android:layout_marginTop="140dp"
        />
    <!-- 端口號輸入框 -->
    <EditText 
        android:text="10000"
        android:id="@+id/PORTEditText"
        android:layout_height="35dp"
        android:layout_width="fill_parent"
        android:layout_marginTop="165dp"
        android:background="@android:color/white"
        />
   <!-- 密碼 -->
    <TextView 
        android:text="登陸密碼："
        android:id="@+id/mimaTextView"
        android:layout_height="wrap_content"
        android:layout_width="wrap_content"
        android:layout_marginTop="210dp"
        android:textSize="20dp"
        />
    <!-- 密碼輸入框 -->
    <EditText 
        
        android:id="@+id/mimaEditText"
        android:layout_height="35dp"
        android:layout_width="fill_parent"
        android:layout_marginTop="235dp"
        android:hint="請輸入登陸密碼"
        android:inputType="textPassword"
        android:background="@android:color/white"
        />
    <!-- 記住密碼復選框 -->
    <CheckBox  
            android:id="@+id/cb_mima"  
            android:layout_width="wrap_content"  
            android:layout_height="wrap_content"  
            android:layout_below="@id/mimaEditText"  
            android:textSize="20dp"
            android:text="記住密碼"  
            /> 
     <!-- 近程按鈕 -->
    <Button 
        android:id="@+id/jinButton"
        android:layout_height="70dp"
        android:layout_width="100dp"
        android:text="近程連接"
        android:layout_alignParentRight="true"
        android:layout_marginTop="380dp"
        />
    <!-- 登陸按鈕 -->
    <Button 
        android:id="@+id/dengluButton"
        android:layout_height="70dp"
        android:layout_width="100dp"
        android:text="登陸"
        android:layout_marginTop="380dp"
        android:layout_centerHorizontal="true"
        />
    <!-- 遠程連接按鈕 -->
    <Button 
        android:id="@+id/yuanButton"
        android:layout_height="70dp"
        android:layout_width="100dp"
        android:text="遠程連接"
        android:layout_alignParentLeft="true"
        android:layout_marginTop="380dp"
        />
    <!-- 申請密鑰 -->
    <Button 
        android:id="@+id/shenqingButton"
        android:layout_height="wrap_content"
        android:layout_width="wrap_content"
        android:text="申請密鑰"
        android:layout_alignParentRight="true"
        android:layout_marginTop="270dp"
        />

</RelativeLayout>

 

package com.laboratory_control.yang;

import java.util.LinkedList;
import java.util.List;

import android.app.Activity;
import android.app.Application;

public class ExitApplication extends Application {
    private List<Activity> activityList = new LinkedList<Activity>();
    private static ExitApplication instance;
    private ExitApplication()
    {
        
    }
    //單例模式中獲取唯一的ExitApplication實例
    public static ExitApplication getInstance()
    {
        if(null==instance)
        {
            instance=new ExitApplication();
        }
        return instance;
    }
    //添加Activity到容器中
    public void addActivity(Activity activity)
    { 
        activityList.add(activity);
    } 
    //遍歷所有Activity並finish
    public void exit()
    { 
        for(Activity activity:activityList)
        { 
            activity.finish();
        } 
        System.exit(0);
    }
}

package com.laboratory_control.yang;

import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;

import android.app.Activity;
import android.app.AlertDialog;
import android.app.AlertDialog.Builder;
import android.content.Context;
import android.content.DialogInterface;
import android.os.Bundle;
import android.view.KeyEvent;
import android.view.View;
import android.view.View.OnClickListener;
import android.widget.ImageButton;
import android.widget.ImageView;
import android.widget.Toast;

public class Control extends MainActivity {
    boolean door_lamp = true;
    boolean room_lamp = true;
    boolean door = true;
    ImageButton door_ImageButton;//門口燈按鈕
    ImageView doorlampImageView;//門口燈圖片
    ImageButton room_ImageButton;//門口燈按鈕
    ImageView roomlampImageView;//門口燈圖片
    ImageButton controlroom_ImageButton;//門按鈕
    ImageView doorImageView;//門圖片
    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.control_main);
        
        door_ImageButton = (ImageButton) findViewById(R.id.door_ImageButton);
        doorlampImageView = (ImageView) findViewById(R.id.DoorLamp_ImageView);
        
        room_ImageButton = (ImageButton) findViewById(R.id.room_ImageButton);
        roomlampImageView = (ImageView) findViewById(R.id.roomLamp_ImageView);
        
        controlroom_ImageButton = (ImageButton) findViewById(R.id.Control_door_ImageButton);
        doorImageView = (ImageView) findViewById(R.id.door_ImageView);
        /**
         * 門口燈按鈕監聽
         */
        door_ImageButton.setOnClickListener(door_ImageButton_Listener);
        /**
         * 屋里燈按鈕監聽
         */
        room_ImageButton.setOnClickListener(room_ImageButton_Listener);
        /**
         * 門按鈕監聽
         */
        controlroom_ImageButton.setOnClickListener(controlroom_ImageButton_Listener);
         /**
         * 為完全退出應用程序而加的代碼
         */
        ExitApplication.getInstance().addActivity(this);
    }
    /**
     * 門口燈按鈕監聽事件
     */
    private OnClickListener door_ImageButton_Listener = new OnClickListener() {
        
        @Override
        public void onClick(View v) {
            // TODO Auto-generated method stub
            if (door_lamp) //打開門口燈
            {
                door_lamp = false;
                try 
                {
                    //獲取輸出流
                    outputStream = socket.getOutputStream();
                    //發送數據
                    outputStream.write("3".getBytes());
                    Toast.makeText(Control.this, "已發送打開門口燈命令", Toast.LENGTH_SHORT).show();
                    doorlampImageView.setImageResource(R.drawable.liangdeng);
                } 
                catch (Exception e) 
                {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
                }
            }
            else //關閉門口燈
            {
                door_lamp = true;
                try 
                {
                    //獲取輸出流
                    outputStream = socket.getOutputStream();
                    //發送數據
                    outputStream.write("4".getBytes());
                    Toast.makeText(Control.this, "已發送關閉門口燈命令", Toast.LENGTH_SHORT).show();
                    doorlampImageView.setImageResource(R.drawable.heideng);
                } 
                catch (Exception e) 
                {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
                }
            }
        }
    };
    /**
     * 屋里燈按鈕監聽事件
     */
    private OnClickListener room_ImageButton_Listener = new OnClickListener() {
        
        @Override
        public void onClick(View v) {
            // TODO Auto-generated method stub
            if (room_lamp) //打開屋里燈
            {
                room_lamp = false;
                try 
                {
                    //獲取輸出流
                    outputStream = socket.getOutputStream();
                    //發送數據
                    outputStream.write("5".getBytes());
                    Toast.makeText(Control.this, "已發送打屋里燈燈命令", Toast.LENGTH_SHORT).show();
                    roomlampImageView.setImageResource(R.drawable.liangdeng);
                } 
                catch (Exception e) 
                {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
                }
            } 
            else //關閉屋里燈
            {
                room_lamp = true;
                try 
                {
                    //獲取輸出流
                    outputStream = socket.getOutputStream();
                    //發送數據
                    outputStream.write("6".getBytes());
                    Toast.makeText(Control.this, "已發送關閉屋里燈命令", Toast.LENGTH_SHORT).show();
                    roomlampImageView.setImageResource(R.drawable.heideng);
                } 
                catch (Exception e) 
                {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
                }
            }
        }
    };
    /**
     * 門按鈕監聽事件
     */
    private OnClickListener controlroom_ImageButton_Listener = new OnClickListener() {
        
        @Override
        public void onClick(View v) {
            // TODO Auto-generated method stub
            if (door) //打開門
            {
                door = false;
                try 
                {
                    //獲取輸出流
                    outputStream = socket.getOutputStream();
                    //發送數據
                    outputStream.write("1".getBytes());
                    Toast.makeText(Control.this, "已發送打開門命令", Toast.LENGTH_SHORT).show();
                    doorImageView.setImageResource(R.drawable.men222);
                } 
                catch (Exception e) 
                {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
                }
            }
            else //關閉門
            {
                door = true;
                try 
                {
                    //獲取輸出流
                    outputStream = socket.getOutputStream();
                    //發送數據
                    outputStream.write("2".getBytes());
                    Toast.makeText(Control.this, "已發送關閉門命令", Toast.LENGTH_SHORT).show();
                    doorImageView.setImageResource(R.drawable.men111);
                } 
                catch (Exception e) 
                {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
                }
            }
        }
    };
    protected void dialog() { 
         AlertDialog.Builder builder = new Builder(Control.this); 
         builder.setMessage("親，您是想？"); 
         builder.setTitle("提示"); 
         builder.setPositiveButton("直接退出", 
          new android.content.DialogInterface.OnClickListener() { 
           @Override
           public void onClick(DialogInterface dialog, int which) { 
           dialog.dismiss(); 
           /**
            * 完全退出應用程序
            */
           ExitApplication.getInstance().exit();
           } 
          }); 
         builder.setNegativeButton("返回上一層", 
          new android.content.DialogInterface.OnClickListener() { 
           @Override
           public void onClick(DialogInterface dialog, int which) { 
           dialog.dismiss(); 
           Control.this.finish(); 
           } 
          }); 
         builder.create().show(); 
        } 
        @Override
        public boolean onKeyDown(int keyCode, KeyEvent event) { 
         if (keyCode == KeyEvent.KEYCODE_BACK && event.getRepeatCount() == 0) { 
          dialog(); 
          return false; 
         } 
         return false; 
        }
}

<?xml version="1.0" encoding="utf-8"?>
<RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
    android:layout_width="match_parent"
    android:layout_height="match_parent" 
    android:background="@android:color/black"
    >

    <!-- 門口燈按鈕 -->
    <ImageButton
        android:id="@+id/door_ImageButton"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:layout_alignParentRight="true"
        android:layout_alignParentTop="true"
        android:layout_marginRight="30dp"
        android:layout_marginTop="5dp"
        android:background="@android:color/black"
        android:src="@drawable/gnome_panel_force_quit" />

    <!-- 門口燈圖片 -->
    <ImageView
        android:id="@+id/DoorLamp_ImageView"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:layout_alignParentLeft="true"
        android:layout_alignParentTop="true"
        android:layout_marginLeft="16dp"
        android:background="@android:color/white"
        android:src="@drawable/heideng" />
    
    <!-- 屋里燈按鈕 -->
    <ImageButton
        android:id="@+id/room_ImageButton"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:layout_marginTop="155dp"
        android:layout_alignRight="@id/door_ImageButton"
        android:background="@android:color/black"
        android:src="@drawable/gnome_panel_force_quit" />

    <!-- 屋里燈燈圖片 -->
    <ImageView
        android:id="@+id/roomLamp_ImageView"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:layout_alignRight="@id/DoorLamp_ImageView"
        android:layout_marginTop="150dp"
        android:background="@android:color/white"
        android:src="@drawable/heideng" />

    <!-- 門口燈開關 -->
    <TextView 
        android:text="門口燈控制"
        android:textColor="@android:color/holo_green_dark"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:layout_marginTop="35dp"
        android:layout_centerHorizontal="true"
        />
     <!-- 屋里燈開關 -->
    <TextView 
        android:text="屋里燈控制"
        android:textColor="@android:color/holo_green_dark"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:layout_marginTop="190dp"
        android:layout_centerHorizontal="true"
        />
     <!-- 門控制按鈕 -->
    <ImageButton
        android:id="@+id/Control_door_ImageButton"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:layout_marginTop="305dp"
        android:layout_alignRight="@id/door_ImageButton"
        android:background="@android:color/black"
        android:src="@drawable/gnome_panel_force_quit" />
    <!-- 門開關 -->
    <TextView 
        android:text="門控制"
        android:textColor="@android:color/holo_green_dark"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:layout_marginTop="337dp"
        android:layout_centerHorizontal="true"
        />
    <!-- 門圖片 -->

    <ImageView
        android:id="@+id/door_ImageView"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:layout_alignRight="@id/DoorLamp_ImageView"
        android:layout_alignTop="@+id/Control_door_ImageButton"
        android:background="@android:color/white"
        android:src="@drawable/men111" />

</RelativeLayout>

權限

<?xml version="1.0" encoding="utf-8"?>
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
    package="com.laboratory_control.yang"
    android:versionCode="1"
    android:versionName="1.0" >

    <uses-sdk
        android:minSdkVersion="16"
        android:targetSdkVersion="21" />

    <!--     獲取手機信息權限 -->  
    <uses-permission android:name="android.permission.READ_PHONE_STATE" />  
    <uses-permission android:name="android.permission.INTERNET"/>
    <uses-permission android:name="android.permission.ACCESS_WIFI_STATE"/>
    <application
        android:allowBackup="true"
        android:icon="@drawable/a333333"
        android:label="@string/app_name"
        android:theme="@style/AppTheme" >
        <activity
            android:name=".MainActivity"
            android:label="@string/app_name" >
            <intent-filter>
                <action android:name="android.intent.action.MAIN" />

                <category android:name="android.intent.category.LAUNCHER" />
            </intent-filter>
        </activity>
        <activity 
            android:name=".Control"
            android:label="Control"
            ></activity>
    </application>

</manifest>

用到的圖片就不貼了

其實只要看過前幾片文章，做這個絕對沒問題。

我還在程序里設置了申請密碼，讀手機的IMEI號 ，然后做了一些運算后當成登陸密碼，（運算方法只有我和信任的人自己知道，凡是想用這款軟件控制實驗室，必須通過我們對他的手機的IMEI號進行運算后才可以得到登陸密碼）我是為了保證每個人的手機安裝軟件后都有自己單獨的登陸密碼，防止其他人安裝軟件后就可以控制實驗室。

上面有運算過程，我已經修改了。防止意外,若有問題QQ946029359

 

說明一下,其實軟件就是普通的TCP客戶端,只不過通過設置IP地址而實現的遠程控制,

最新版TCPClient請下載這個,

現在接着說,軟件下載的地址,可在百度手機助手,安卓市場,91助手下載更新,這個就是做的最終版的Android軟件,直接綁定設備實現遠程控制

 

 今天剛做好

 

   

 

使用請看這一系列文章

http://www.cnblogs.com/yangfengwu/category/1187355.html

 

后期准備也會完善實驗室這個軟件,因為這是當年剛入門Android時做的軟件...反正有各種問題...........

軟件可以在上搜索實驗室

關於密碼列如我的手機

取前六位863328除6 =143888然后減一 = 143887

因為路由器的公網IP會變,可以用花生殼申請一個域名,這樣登陸的時候輸入域名就行了.解決公網IP會變的麻煩..這是網友雲霄(QQ名稱)告訴我的..謝謝他