傻人干活才累.
用openwrt有一年多了, 數據傳輸一直使用wget從外部的webserver取. 這樣的方法我個人認為還算輕松.
可是調試的多了,寫大型一點的程序,總是這樣就有點麻煩了.
安裝軟件也是如此.
前幾天無意中看到了opkg.conf, 認為這個能夠讓少輸入一些地址.
改動opkg.conf文件例如以下
root@OpenWrt:/etc# cat opkg.conf
dest root /
dest ram /tmp
lists_dir ext /var/opkg-lists
option overlay_root /overlay
src/gz barrier_breaker_base http://192.168.202.110/base
#src/gz barrier_breaker_base http://downloads.openwrt.org/barrier_breaker/14.07/ramips/mt7620a/packages/base
#src/gz barrier_breaker_luci http://downloads.openwrt.org/barrier_breaker/14.07/ramips/mt7620a/packages/luci
#src/gz barrier_breaker_management http://downloads.openwrt.org/barrier_breaker/14.07/ramips/mt7620a/packages/management
#src/gz barrier_breaker_oldpackages http://downloads.openwrt.org/barrier_breaker/14.07/ramips/mt7620a/packages/oldpackages
#src/gz barrier_breaker_packages http://downloads.openwrt.org/barrier_breaker/14.07/ramips/mt7620a/packages/packages
#src/gz barrier_breaker_routing http://downloads.openwrt.org/barrier_breaker/14.07/ramips/mt7620a/packages/routing
#src/gz barrier_breaker_telephony http://downloads.openwrt.org/barrier_breaker/14.07/ramips/mt7620a/packages/telephony
例如以下所看到的: 運行安裝
root@OpenWrt:/etc# opkg update
root@OpenWrt:/etc# opkg install nano
root@OpenWrt:/etc# opkg remove nano