TP-LINK WR941 DD-WRT刷回OpenWRT及OpenWRT刷回原廠固件

1、DD-Wrt 刷回 OpenWrt　　

A、從官網下載固件：

root@TL-DDWRT:/tmp# wget http://downloads.openwrt.org/barrier_breaker/14.07/ar7xx/generic/openwrt-ar71xx-generic-tl-wr941nd-v4-squashfs-factory.bin
Connecting to downloads.openwrt.org (78.24.191.177:80)
openwrt-ar71xx-gener 100% |*******************************| 3840k 0:00:00 ETA

B、重命名固件：

root@TL-DDWRT:/tmp# mv openwrt-ar71xx-generic-tl-wr941nd-v4-squashfs-factory.bin wr941.bin

C、清空內存：

root@TL-DDWRT:/tmp# mtd erase nvram
Unlocking nvram ...
Erasing nvram ...

D、刷寫固件：

root@TL-DDWRT:/tmp# mtd -r write wr941.bin
Unlocking linux ...
Writing from wr941.bin to linux ... [w]

E、刷寫完畢，重新登陸：

　　IP：192.168.1.1
　　ID：root
　　PD:root

F、開啟遠程訪問：

　　Network  -->Firewall -->General Settings -->Zones -->wan[(Input|Output)accept ,(Forward)reject]

 

2、Openwrt刷回原廠固件：

A、開啟HFS，獲取下載地址：http://192.168.1.87/wr941nv4_v5.bin

B、下載固件：

root@TL-OPENWRT:/tmp# wget http://192.168.1.87/wr941nv4_v5.bin
Connecting to 192.168.1.87 (192.168.1.87:80)
wr941nv4_v5.bin 100% |*******************************| 3840k 0:00:00 ETA

 C、查看路由器支持的升級命名：

root@TL-OPENWRT:/tmp# cat /proc/mtd
dev:size   erasesize  name
mtd0: 00020000 00010000 "u-boot"
mtd1: 000d9ebc 00010000 "kernel"
mtd2: 002f6144 00010000 "rootfs"
mtd3: 00100000 00010000 "rootfs_data"
mtd4: 00010000 00010000 "art"
mtd5: 003d0000 00010000 "firmware"

 D、清空內存：

root@TL-OPENWRT:/tmp# mtd erase nvram
Unlocking nvram ...
Erasing nvram ...

E、刷寫固件：

root@TL-OPENWRT:/tmp# mtd -r write wr941nv4_v5.bin firmware
Unlocking linux ...
Writing from wr941.bin to linux ... [w]

F、刷寫完畢，重新登陸：

　　IP:192.168.1.1
　　ID:admin
　　PD:admin