C# WinForm 拖動無邊框窗體 改變無邊框窗體尺寸

經常遇到這種情況、窗體的邊框去掉了、然后種種問題就出來了：
不能拖動、
不能改變窗體大小、
不能．．．．．．
當然、肯定有解決方案滴*＾_＾*
今天的目標就是：
可以直接拖動沒有邊框的窗體、
可以直接拉拽窗體改變其大小、
制作步驟如下：
新建WinForm程序、添加一個啟動的窗體、
將其邊框設置為None、
進入代碼編輯界面、
定義如下常量值：
const int Guying_HTLEFT = 10;
const int Guying_HTRIGHT = 11;
const int Guying_HTTOP = 12;
const int Guying_HTTOPLEFT = 13;
const int Guying_HTTOPRIGHT = 14;
const int Guying_HTBOTTOM = 15;
const int Guying_HTBOTTOMLEFT = 0x10;
const int Guying_HTBOTTOMRIGHT = 17;
定義用於設置的常量值
重寫系統WndProc函數：
protected override void WndProc(ref Message m)
{
switch (m.Msg)
{
case 0x0084:
base.WndProc(ref m);
Point vPoint = new Point((int)m.LParam & 0xFFFF,
(int)m.LParam >> 16 & 0xFFFF);
vPoint = PointToClient(vPoint);
if (vPoint.X <= 5)
if (vPoint.Y <= 5)
m.Result = (IntPtr)Guying_HTTOPLEFT;
else if (vPoint.Y >= ClientSize.Height - 5)
m.Result = (IntPtr)Guying_HTBOTTOMLEFT;
else m.Result = (IntPtr)Guying_HTLEFT;
else if (vPoint.X >= ClientSize.Width - 5)
if (vPoint.Y <= 5)
m.Result = (IntPtr)Guying_HTTOPRIGHT;
else if (vPoint.Y >= ClientSize.Height - 5)
m.Result = (IntPtr)Guying_HTBOTTOMRIGHT;
else m.Result = (IntPtr)Guying_HTRIGHT;
else if (vPoint.Y <= 5)
m.Result = (IntPtr)Guying_HTTOP;
else if (vPoint.Y >= ClientSize.Height - 5)
m.Result = (IntPtr)Guying_HTBOTTOM;
break;
case 0x0201: //鼠標左鍵按下的消息
m.Msg = 0x00A1; //更改消息為非客戶區按下鼠標
m.LParam = IntPtr.Zero; //默認值
m.WParam = new IntPtr(2);//鼠標放在標題欄內
base.WndProc(ref m);
break;
default:
base.WndProc(ref m);
break;
}
}
重寫系統WndProc函數
OK、運行一下看看效果吧、可以拖動、可以拖拽窗體改變尺寸、、、
呵呵、
完整代碼如下：
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Windows.Forms;
namespace Demo
{
public partial class Frm_Main : Form
{
public Frm_Main()
{
InitializeComponent();
StartPosition = FormStartPosition.CenterScreen;
this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.None;
}
const int Guying_HTLEFT = 10;
const int Guying_HTRIGHT = 11;
const int Guying_HTTOP = 12;
const int Guying_HTTOPLEFT = 13;
const int Guying_HTTOPRIGHT = 14;
const int Guying_HTBOTTOM = 15;
const int Guying_HTBOTTOMLEFT = 0x10;
const int Guying_HTBOTTOMRIGHT = 17;
protected override void WndProc(ref Message m)
{
switch (m.Msg)
{
case 0x0084:
base.WndProc(ref m);
Point vPoint = new Point((int)m.LParam & 0xFFFF,
(int)m.LParam >> 16 & 0xFFFF);
vPoint = PointToClient(vPoint);
if (vPoint.X <= 5)
if (vPoint.Y <= 5)
m.Result = (IntPtr)Guying_HTTOPLEFT;
else if (vPoint.Y >= ClientSize.Height - 5)
m.Result = (IntPtr)Guying_HTBOTTOMLEFT;
else m.Result = (IntPtr)Guying_HTLEFT;
else if (vPoint.X >= ClientSize.Width - 5)
if (vPoint.Y <= 5)
m.Result = (IntPtr)Guying_HTTOPRIGHT;
else if (vPoint.Y >= ClientSize.Height - 5)
m.Result = (IntPtr)Guying_HTBOTTOMRIGHT;
else m.Result = (IntPtr)Guying_HTRIGHT;
else if (vPoint.Y <= 5)
m.Result = (IntPtr)Guying_HTTOP;
else if (vPoint.Y >= ClientSize.Height - 5)
m.Result = (IntPtr)Guying_HTBOTTOM;
break;
case 0x0201: //鼠標左鍵按下的消息
m.Msg = 0x00A1; //更改消息為非客戶區按下鼠標
m.LParam = IntPtr.Zero; //默認值
m.WParam = new IntPtr(2);//鼠標放在標題欄內
base.WndProc(ref m);
break;
default:
base.WndProc(ref m);
break;
}
}
}
}
完整代碼