CentOS6.4 配置HAProxy+Keepalived

安裝HAProxy請參考

http://www.cnblogs.com/kgdxpr/p/3272861.html

安裝Keepalived

1、下載安裝依賴包

yum install -y wget make gcc openssl-devel popt-devel

2、下載、安裝Keepalived

wget http://www.keepalived.org/software/keepalived-1.2.8.tar.gz
tar zxvf keepalived-1.2.8.tar.gz
cd keepalived-1.2.8
./configure --prefix=/usr/local/keepalived
make
make install

3、安裝成功后做成服務模式。

cp /usr/local/keepalived/sbin/keepalived /usr/sbin/
cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/

4、配置文件

mkdir -p /etc/keepalived/
cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/keepalived.conf
chmod +x /etc/init.d/keepalived
vi /etc/keepalived/keepalived.conf

global_defs {
    router_id LVS_DEVEL
}
#監測haproxy進程狀態，每2秒執行一次
vrrp_script chk_haproxy {
    script "/etc/keepalived/chk_haproxy.sh"
    interval 2
    weight 2
}
vrrp_instance VI_1 {
    state MASTER          #從服務器為BACKUP
    interface eth0
    virtual_router_id 51
    priority 100             #從服務器要低於100
    advert_int 1
    mcast_src_ip 10.10.3.171    #MASTER服務器IP,從服務器寫從服務器的IP
    authentication {
        auth_type PASS
        auth_pass 111111
    }
    track_script {
        chk_haproxy    #監測haproxy進程狀態
    }
    virtual_ipaddress {
        10.10.3.170    #虛擬IP
    }
}

chk_haproxy.sh內容

vi /etc/keepalived/chk_haproxy.sh

status=$(ps aux|grep haproxy | grep -v grep | grep -v bash | wc -l)
if [ "${status}" = "0" ]; then
    /etc/init.d/haproxy start

    status2=$(ps aux|grep haproxy | grep -v grep | grep -v bash |wc -l)

    if [ "${status2}" = "0"  ]; then
            /etc/init.d/keepalived stop
    fi
fi

啟動和關閉服務

service keepalived start
service keepalived stop

高可用測試

1、將Master上的keepalived停止

查看Master上的日志

tail -f /var/log/messages

Sep 23 01:24:34 181 Keepalived[3125]: Stopping Keepalived v1.2.8 (09/23,2013)
Sep 23 01:24:34 181 Keepalived_vrrp[3127]: VRRP_Instance(VI_1) sending 0 priority
Sep 23 01:24:34 181 Keepalived_vrrp[3127]: VRRP_Instance(VI_1) removing protocol VIPs.

發現Master釋放了VIP

再查看Backup上的日志

Sep 23 01:20:26 182 Keepalived_vrrp[2887]: VRRP_Instance(VI_1) Transition to MASTER STATE
Sep 23 01:20:27 182 Keepalived_vrrp[2887]: VRRP_Instance(VI_1) Entering MASTER STATE
Sep 23 01:20:27 182 Keepalived_vrrp[2887]: VRRP_Instance(VI_1) setting protocol VIPs.
Sep 23 01:20:27 182 Keepalived_vrrp[2887]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 10.10.3.180
Sep 23 01:20:27 182 Keepalived_healthcheckers[2886]: Netlink reflector reports IP 10.10.3.180 added

發現Backup綁定了VIP

2、將Master上的keepalived啟動

查看Master上的日志

tail -f /var/log/messages

Sep 23 01:27:56 181 Keepalived_vrrp[3450]: VRRP_Instance(VI_1) Entering MASTER STATE
Sep 23 01:27:56 181 Keepalived_vrrp[3450]: VRRP_Instance(VI_1) setting protocol VIPs.
Sep 23 01:27:56 181 Keepalived_vrrp[3450]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 10.10.3.180
Sep 23 01:27:56 181 Keepalived_healthcheckers[3449]: Netlink reflector reports IP 10.10.3.180 added

發現Master綁定了VIP

再查看Backup上的日志

Sep 23 01:21:15 182 Keepalived_vrrp[2887]: VRRP_Instance(VI_1) Received higher prio advert
Sep 23 01:21:15 182 Keepalived_vrrp[2887]: VRRP_Instance(VI_1) Entering BACKUP STATE
Sep 23 01:21:15 182 Keepalived_vrrp[2887]: VRRP_Instance(VI_1) removing protocol VIPs.
Sep 23 01:21:15 182 Keepalived_healthcheckers[2886]: Netlink reflector reports IP 10.10.3.180 removed

發現Backup釋放了VIP