Xilinx Platform Usb Cable

 

Key Features

• High-performance FPGA configuration and PROM/CPLD programming
  • Includes innovative FPGA-based acceleration firmware encapsulated in a small
    form factor pod attached to the cable
  • Supports JTAG and Slave-Serial programming topologies
  • Firmware downloadable over cable
• Easy to use
  • Fully integrated and optimized for use with Xilinx iMPACT software
  • Intuitive multiple cable management from a single application
  • Compatible with Windows and Linux operating systems
  • Automatically senses and adapts to target I/O voltage
  • Interfaces to devices operating at 5V (TTL), 3.3V (LVCMOS), 2.5V, 1.8V and 1.5V
  • Bus-powered USB device (no power supply required)
  • Flyleads compatible
  • Target power status LED
  • Firmware updates are transparent to the user
• Reliable
  • Backwards compatibility with Platform Cable USB, including Pb-Free (RoHS-compliant)
  • USB Integrators Forum (USB-IF) certified
  • CE and FCC compliant
  • Leverages industry standards, including JTAG Boundary-Scan IEEE 1149.1, SPI and USB 2.0
  • Compatible with Full-Speed and Hi-Speed USB ports
  • Programs and configures all Xilinx devices**
• Third-party PROM device programming support
  • Directly programs selected Serial Peripheral Interface (SPI) flash memory devices
  • Indirectly programs selected SPI or parallel flash memory devices via FPGA JTAG port
  • Highly optimized for use with Xilinx design tools - ISE® Foundation™ Software, Embedded Development Kit, ChipScope Pro Analyzer and System Generator for DSP.
• Pb-Free (RoHS-compliant)
• Recommended for prototyping use only

** Note: Xilinx iMPACT software is required for programming and configuration

 

 

Platform Cable USB 功能概述

• 采用CY7C68013A+XC2C256方案，與原裝Platform Cable USB完全兼容
• 支持所有Xilinx器件下載，包括FPGA / CPLD / ISP Configuration PROM所有器件
• 支持JTAG / Slave Serial / SPI下載模式，可配置所有Xilinx器件
• 支持目標系統的下載接口電壓：5V / 3.3V / 2.5V / 1.8V / 1.5V
• 支持Xilinx ISE / iMPACT / ChipScope
• 目標器件下載時鍾可選，且支持XILINX軟件的自動調速

支持的軟件

• Xilinx ISE
• iMPACT
• ChipScope

支持的器件

• 支持所有Xilinx器件下載，包括FPGA / CPLD / ISP Configuration PROM所有器件

產品特性

• 采用CY7C68013A+XC2C256方案，與原裝Platform Cable USB完全兼容

與PC機的連接

• 通過USB接口與計算機連接

與目標板的連接

• 通過 JTAG、Slave Serial、SPI 接口與目標板連接

硬件開發環境

通過Platform Cable USB連接“FPGA/CPLD目標板”和“PC”，建立完整的硬件開發環境，對目標芯片進行編程、調試

連接目標板

Platform Cable USB可以通過三種接口連接至目標板，接口定義如下:

Platform Cable USB狀態燈說明

• 紅紫色：接入了USB
• 紫色：接入了USB，且Vref有電供入（連接的開發板有上電）