一、安裝ASM之前，首先要檢查一下linux操作系統的版本
[root@yft ~]# lsb_release -a LSB Version: :core-3.1-ia32:core-3.1-noarch:graphics-3.1-ia32:graphics-3.1-noarch Distributor ID: RedHatEnterpriseServer Description: Red Hat Enterprise Linux Server release 5.4 (Tikanga) Release: 5.4 Codename: Tikanga
[root@yft ~]# uname -rm 2.6.18-164.el5 i686
此時可以到oracle官網去下載相應的rpm包，鏈接地址：http://www.oracle.com/technetwork/server-storage/linux/downloads/rhel5-084877.html
根據本機的配置，需要下載並安裝如下3個rpm包：
[root@yft 1234]# ls oracleasm-2.6.18-164.el5-2.0.5-1.el5.i686.rpm oracleasmlib-2.0.4-1.el5.i386.rpm oracleasm-support-2.1.7-1.el5.i386.rpm [root@yft 1234]# rpm -ivh oracleasm* warning: oracleasm-2.6.18-164.el5-2.0.5-1.el5.i686.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159 Preparing... ########################################### [100%] 1:oracleasm-support ########################################### [ 33%] 2:oracleasm-2.6.18-164.el########################################### [ 67%] 3:oracleasmlib ########################################### [100%]
二、配置ASMlib，再使用ASMlib之前，必須運行配置腳本准備驅動程序：
使用root執行：/etc/init.d/oracleasm configure
[root@yft 1234]# /etc/init.d/oracleasm configure Configuring the Oracle ASM library driver. This will configure the on-boot properties of the Oracle ASM library driver. The following questions will determine whether the driver is loaded on boot and what permissions it will have. The current values will be shown in brackets ('[]'). Hitting <ENTER> without typing an answer will keep that current value. Ctrl-C will abort. Default user to own the driver interface []: oracle Default group to own the driver interface []: dba Start Oracle ASM library driver on boot (y/n) [n]: y Scan for Oracle ASM disks on boot (y/n) [y]: y Writing Oracle ASM library driver configuration: done Initializing the Oracle ASMLib driver: [ OK ] Scanning the system for Oracle ASMLib disks: [ OK ] [root@yft 1234]# /etc/init.d/oracleasm enable Writing Oracle ASM library driver configuration: done Initializing the Oracle ASMLib driver: [ OK ] Scanning the system for Oracle ASMLib disks: [ OK ]
三、配置ASM磁盤：
[root@yft 1234]# fdisk /dev/sdf Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) Command (m for help): p Disk /dev/sdf: 4294 MB, 4294967296 bytes 255 heads, 63 sectors/track, 522 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-522, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-522, default 522): Using default value 522 Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. [root@yft 1234]# partprobe [root@yft 1234]# /etc/init.d/oracleasm createdisk vol1 /dev/sdf1 Marking disk "vol1" as an ASM disk: [ OK ]
四、創建需要的用戶和用戶組：
使用root用戶執行：
/usr/sbin/groupadd -g 501 oinstall
/usr/sbin/groupadd -g 502 dba
/usr/sbin/groupadd -g 503 oper
/usr/sbin/groupadd -g 504 asmadmin
/usr/sbin/groupadd -g 505 asmoper
/usr/sbin/groupadd -g 506 asmdba
/usr/sbin/useradd -g oinstall -G dba,asmdba,oper oracle
/usr/sbin/useradd -g oinstall -G asmadmin,asmdba,asmoper,oper,dba grid
mkdir -p /u01/app/oracle/product/11.2.0/dbhome_1
mkdir -p /u01/app/oracle/grid/product/11.2.0/grid
chown -R oracle:oinstall /u01/app/
chown -R grid:oinstall /u01/app/grid
chomod -R 775 /u01
1 [oracle@yft ~]$ vi .bash_profile 2 3 if [ -f ~/.bashrc ]; then 4 . ~/.bashrc 5 fi 6 7 # User specific environment and startup programs 8 9 PATH=$PATH:$HOME/bin 10 11 export PATH 12 # 13 #ORACLE_11G 14 ORACLE_BASE=/u01/app/oracle 15 ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1 16 ORACLE_SID=yft 17 PATH=$PATH:$ORACLE_HOME/bin 18 export ORACLE_BASE ORACLE_HOME ORACLE_SID PATH 19 #end 20 21 [grid@yft ~]$ view .bash_profile 22 23 # .bash_profile 24 25 # Get the aliases and functions 26 if [ -f ~/.bashrc ]; then 27 . ~/.bashrc 28 fi 29 # .bash_profile 30 31 # Get the aliases and functions 32 if [ -f ~/.bashrc ]; then 33 . ~/.bashrc 34 fi 35 36 # User specific environment and startup programs 37 38 PATH=$PATH:$HOME/bin 39 40 export PATH 41 42 #ORACLE_11G 43 ORACLE_BASE=/u01/app/grid 44 ORACLE_HOME=$ORACLE_BASE/product/11.2.0/grid 45 ORACLE_SID=+ASM 46 PATH=$PATH:$ORACLE_HOME/bin 47 export ORACLE_BASE ORACLE_HOME ORACLE_SID PATH 48 #end
五、配置grid infrastructure：
[grid@yft u01]$ cd grid/ [grid@yft grid]$ ls doc response runcluvfy.sh sshsetup welcome.html install rpm runInstaller stage [grid@yft grid]$ ./runInstaller Starting Oracle Universal Installer... Checking Temp space: must be greater than 80 MB. Actual 1031 MB Passed Checking swap space: must be greater than 150 MB. Actual 2047 MB Passed Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed Preparing to launch Oracle Universal Installer from /tmp/OraInstall2013-03-20_10-36-24PM. Please wait ...
安裝順帶配置ASM，當然也可以選最后一個只安裝軟件，隨后手工配置(具體請自行查看文檔)：
ASM磁盤配置正常的話會直接顯示下面的內容：
Oracle會要求密碼強度，當然可以忽略過去，這里使用Oracle1234：
下面選擇組的話可以保持默認：
需要配置1.5G以上物理內存：
最后確認安裝：
在76%處會卡住屬於正常，隨機會跳出下面的畫面，使用root用戶運行一下就可以了：
[root@yft 1234]# /u01/app/grid/product/11.2.0/grid/root.sh Running Oracle 11g root.sh script... The following environment variables are set as: ORACLE_OWNER= grid ORACLE_HOME= /u01/app/grid/product/11.2.0/grid Enter the full pathname of the local bin directory: [/usr/local/bin]: The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: n The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: n The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]: n Entries will be added to the /etc/oratab file as needed by Database Configuration Assistant when a database is created Finished running generic part of root.sh script. Now product-specific root actions will be performed. 2013-03-20 23:11:13: Checking for super user privileges 2013-03-20 23:11:13: User has super user privileges 2013-03-20 23:11:13: Parsing the host name Using configuration parameter file: /u01/app/grid/product/11.2.0/grid/crs/install/crsconfig_params Creating trace directory LOCAL ADD MODE Creating OCR keys for user 'grid', privgrp 'oinstall'.. Operation successful. CRS-4664: Node yft successfully pinned. Adding daemon to inittab CRS-4123: Oracle High Availability Services has been started. ohasd is starting yft 2013/03/20 23:12:30 /u01/app/grid/product/11.2.0/grid/cdata/yft/backup_20130320_231230.olr Successfully configured Oracle Grid Infrastructure for a Standalone Server Updating inventory properties for clusterware Starting Oracle Universal Installer... Checking swap space: must be greater than 500 MB. Actual 1816 MB Passed The inventory pointer is located at /etc/oraInst.loc The inventory is located at /u01/app/oraInventory 'UpdateNodeList' was successful.
[grid@yft ~]$ sqlplus /nolog SQL*Plus: Release 11.2.0.1.0 Production on Thu Mar 21 16:00:41 2013 Copyright (c) 1982, 2009, Oracle. All rights reserved. SQL> conn /as sysdba Connected. SQL> select name,state from v$asm_diskgroup; NAME STATE ------------------------------ ----------- DATA MOUNTED