C語言字符串函數大全
函數名: stpcpy
功 能: 拷貝一個字符串到另一個
用 法: char *stpcpy(char *destin, char *source);
程序例:
#include <stdio.h>
#include <string.h>
int main(void)
{
char string[10];
char *str1 = "abcdefghi";
stpcpy(string, str1);
printf("%s\n", string);
return 0;
}
函數名: strcat
功 能: 字符串拼接函數
用 法: char *strcat(char *destin, char *source);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char destination[25];
char *blank = " ", *c = "C++", *Borland = "Borland";
strcpy(destination, Borland);
strcat(destination, blank);
strcat(destination, c);
printf("%s\n", destination);
return 0;
}
函數名: strchr
功 能: 在一個串中查找給定字符的第一個匹配之處\
用 法: char *strchr(char *str, char c);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char string[15];
char *ptr, c = 'r';
strcpy(string, "This is a string");
ptr = strchr(string, c);
if (ptr)
printf("The character %c is at position: %d\n", c, ptr-string);
else
printf("The character was not found\n");
return 0;
}
函數名: strcmp
功 能: 串比較
用 法: int strcmp(char *str1, char *str2);
看Asic碼，str1>str2，返回值 > 0；兩串相等，返回0
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char *buf1 = "aaa", *buf2 = "bbb", *buf3 = "ccc";
int ptr;
ptr = strcmp(buf2, buf1);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n");
else
printf("buffer 2 is less than buffer 1\n");
ptr = strcmp(buf2, buf3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 3\n");
else
printf("buffer 2 is less than buffer 3\n");
return 0;
}
函數名: strncmpi
功 能: 將一個串中的一部分與另一個串比較, 不管大小寫
用 法: int strncmpi(char *str1, char *str2, unsigned maxlen);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char *buf1 = "BBB", *buf2 = "bbb";
int ptr;
ptr = strcmpi(buf2, buf1);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n");
if (ptr < 0)
printf("buffer 2 is less than buffer 1\n");
if (ptr == 0)
printf("buffer 2 equals buffer 1\n");
return 0;
}
函數名: strcpy
功 能: 串拷貝
用 法: char *strcpy(char *str1, char *str2);
程序例:
#include <stdio.h>
#include <string.h>
int main(void)
{
char string[10];
char *str1 = "abcdefghi";
strcpy(string, str1);
printf("%s\n", string);
return 0;
}
函數名: strcspn
功 能: 在串中查找第一個給定字符集內容的段
用 法: int strcspn(char *str1, char *str2);
程序例:
#include <stdio.h>
#include <string.h>
#include <alloc.h>
int main(void)
{
char *string1 = "1234567890";
char *string2 = "747DC8";
int length;
length = strcspn(string1, string2);
printf("Character where strings intersect is at position %d\n", length);
return 0;
}
函數名: strdup
功 能: 將串拷貝到新建的位置處
用 法: char *strdup(char *str);
程序例:
#include <stdio.h>
#include <string.h>
#include <alloc.h>
int main(void)
{
char *dup_str, *string = "abcde";
dup_str = strdup(string);
printf("%s\n", dup_str);
free(dup_str);
return 0;
}
函數名: stricmp
功 能: 以大小寫不敏感方式比較兩個串
用 法: int stricmp(char *str1, char *str2);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char *buf1 = "BBB", *buf2 = "bbb";
int ptr;
ptr = stricmp(buf2, buf1);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n");
if (ptr < 0)
printf("buffer 2 is less than buffer 1\n");
if (ptr == 0)
printf("buffer 2 equals buffer 1\n");
return 0;
}
函數名: strerror
功 能: 返回指向錯誤信息字符串的指針
用 法: char *strerror(int errnum);
程序例:
#include <stdio.h>
#include <errno.h>
int main(void)
{
char *buffer;
buffer = strerror(errno);
printf("Error: %s\n", buffer);
return 0;
}
函數名: strcmpi
功 能: 將一個串與另一個比較, 不管大小寫
用 法: int strcmpi(char *str1, char *str2);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char *buf1 = "BBB", *buf2 = "bbb";
int ptr;
ptr = strcmpi(buf2, buf1);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n");
if (ptr < 0)
printf("buffer 2 is less than buffer 1\n");
if (ptr == 0)
printf("buffer 2 equals buffer 1\n");
return 0;
}
函數名: strncmp
功 能: 串比較
用 法: int strncmp(char *str1, char *str2, int maxlen);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char *buf1 = "aaabbb", *buf2 = "bbbccc", *buf3 = "ccc";
int ptr;
ptr = strncmp(buf2,buf1,3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n");
else
printf("buffer 2 is less than buffer 1\n");
ptr = strncmp(buf2,buf3,3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 3\n");
else
printf("buffer 2 is less than buffer 3\n");
return(0);
}
函數名: strncmpi
功 能: 把串中的一部分與另一串中的一部分比較, 不管大小寫
用 法: int strncmpi(char *str1, char *str2);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char *buf1 = "BBBccc", *buf2 = "bbbccc";
int ptr;
ptr = strncmpi(buf2,buf1,3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n");
if (ptr < 0)
printf("buffer 2 is less than buffer 1\n");
if (ptr == 0)
printf("buffer 2 equals buffer 1\n");
return 0;
}
函數名: strncpy
功 能: 串拷貝
用 法: char *strncpy(char *destin, char *source, int maxlen);
程序例:
#include <stdio.h>
#include <string.h>
int main(void)
{
char string[10];
char *str1 = "abcdefghi";
strncpy(string, str1, 3);
string[3] = '\0';
printf("%s\n", string);
return 0;
}
函數名: strnicmp
功 能: 不注重大小寫地比較兩個串
用 法: int strnicmp(char *str1, char *str2, unsigned maxlen);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char *buf1 = "BBBccc", *buf2 = "bbbccc";
int ptr;
ptr = strnicmp(buf2, buf1, 3);
if (ptr > 0)
printf("buffer 2 is greater than buffer 1\n");
if (ptr < 0)
printf("buffer 2 is less than buffer 1\n");
if (ptr == 0)
printf("buffer 2 equals buffer 1\n");
return 0;
}
函數名: strnset
功 能: 將一個串中的所有字符都設為指定字符
用 法: char *strnset(char *str, char ch, unsigned n);
程序例:
#include <stdio.h>
#include <string.h>
int main(void)
{
char *string = "abcdefghijklmnopqrstuvwxyz";
char letter = 'x';
printf("string before strnset: %s\n", string);
strnset(string, letter, 13);
printf("string after strnset: %s\n", string);
return 0;
}
函數名: strpbrk
功 能: 在串中查找給定字符集中的字符
用 法: char *strpbrk(char *str1, char *str2);
程序例:
#include <stdio.h>
#include <string.h>
int main(void)
{
char *string1 = "abcdefghijklmnopqrstuvwxyz";
char *string2 = "onm";
char *ptr;
ptr = strpbrk(string1, string2);
if (ptr)
printf("strpbrk found first character: %c\n", *ptr);
else
printf("strpbrk didn't find character in set\n");
return 0;
}
調用格式：result = strpbrk(source-string, searching-string)
用途：在源字符串(source-string）中找出最先含有搜索字符串（searching-string)中的任一字符的位置並返回，若找不到則返回空指針。
注意：返回值是指向源字符串的指針，所以在使用返回結果的時候，請確保源字符串的有效性。
舉MSDN中的例子：
數據：
char string[100] = "The 3 men and 2 boys ate 5 pigs\n";
char *result;
調用：
result = strpbrk( string, "0123456789" );//在string中找出最先出現0~9中某一個字符的位置
printf( "1: %s\n", result++ );
result = strpbrk( result, "0123456789" );
printf( "2: %s\n", result++ );
result = strpbrk( result, "0123456789" );
printf( "3: %s\n", result );
輸出的結果是：
1. 3 men and 2 boys ate 5 pigs//最先發現3
2: 2 boys ate 5 pigs//最先發現2，注意這時開始源串是上一次的結果的下一位置，即跳過了數字'3'，下同
3: 5 pigs//最先發現5
------------------------
函數名: strrchr
功 能: 在串中查找指定字符的最后一個出現
用 法: char *strrchr(char *str, char c);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char string[15];
char *ptr, c = 'r';
strcpy(string, "This is a string");
ptr = strrchr(string, c);
if (ptr)
printf("The character %c is at position: %d\n", c, ptr-string);
else
printf("The character was not found\n");
return 0;
}
函數名: strrev
功 能: 串倒轉
用 法: char *strrev(char *str);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char *forward = "string";
printf("Before strrev(): %s\n", forward);
strrev(forward);
printf("After strrev(): %s\n", forward);
return 0;
}
函數名: strset
功 能: 將一個串中的所有字符都設為指定字符
用 法: char *strset(char *str, char c);
程序例:
#include <stdio.h>
#include <string.h>
int main(void)
{
char string[10] = "123456789";
char symbol = 'c';
printf("Before strset(): %s\n", string);
strset(string, symbol);
printf("After strset(): %s\n", string);
return 0;
}
函數名: strspn
功 能: 在串中查找指定字符集的子集的第一次出現
用 法: int strspn(char *str1, char *str2);
程序例:
#include <stdio.h>
#include <string.h>
#include <alloc.h>
int main(void)
{
char *string1 = "1234567890";
char *string2 = "123DC8";
int length;
length = strspn(string1, string2);
printf("Character where strings differ is at position %d\n", length);
return 0;
}
函數名: strstr
功 能: 在串中查找指定字符串的第一次出現
用 法: char *strstr(char *str1, char *str2);
程序例:
#include <stdio.h>
#include <string.h>
int main(void)
{
char *str1 = "Borland International", *str2 = "nation", *ptr;
ptr = strstr(str1, str2);
printf("The substring is: %s\n", ptr);
return 0;
}
函數名: strtod
功 能: 將字符串轉換為double型值
用 法: double strtod(char *str, char **endptr);
程序例:
#include <stdio.h>
#include <stdlib.h>
int main(void)
{
char input[80], *endptr;
double value;
printf("Enter a floating point number:");
gets(input);
value = strtod(input, &endptr);
printf("The string is %s the number is %lf\n", input, value);
return 0;
}
函數名: strtok
功 能: 查找由在第二個串中指定的分界符分隔開的單詞
用 法: char *strtok(char *str1, char *str2);
程序例:
#include <string.h>
#include <stdio.h>
int main(void)
{
char input[16] = "abc,d";
char *p;
/* strtok places a NULL terminator
in front of the token, if found */
p = strtok(input, ",");
if (p) printf("%s\n", p);
/* A second call to strtok using a NULL
as the first parameter returns a pointer
to the character following the token */
p = strtok(NULL, ",");
if (p) printf("%s\n", p);
return 0;
}
用法：token = strtok(source-str,seperator-str)
用途：在source-str中找出以seperator-str中的字符為分隔的字符串，即是源串中除去了含有分隔串中的所有字符后余下的一段段的字符串，每調用一次找到一串，找不到則返回空串。
注意：返回值是指向源串的指針，所以同樣要保證源串的有效性，此外，每次調用返回找到的子串的時候都會把源串中該子串的尾部字符（原來是搜索串中的某一字符）修改成'\0'字符。還有一個要注意的是，這個函數使用全局的靜態緩沖區（函數自己的靜態buffer)，所以在某一個線程里不要同時調用這個函數來處理兩個字符串，否則極易出現不正常的結果，正確的處理方法是先找出一個字符串中的所有子串，然后才轉到處理另一個字符串。多線程之間則不會出現這種干擾。
同樣舉MSDN中的例子：
數據准備：
char string[] = "A string\tof ,,tokens\nand some more tokens";
char seps[] = " ,\t\n";
char *token;
調用示例：
token = strtok( string, seps );
while( token != NULL )
{
/* While there are tokens in "string" */
printf( " %s\n", token );
/* Get next token: */
token = strtok( NULL, seps );
/*注意到上面這個NULL，它表明的是從上次調用結果中strtok自有的緩沖區中繼續取出余下的子串*/
}
顯示結果：
A //此時string[1]='\0'，原先為空格
string
of
tokens
and
some
more
tokens
-----------------------
函數名: strtol
功 能: 將串轉換為長整數
用 法: long strtol(char *str, char **endptr, int base);
程序例:
#include <stdlib.h>
#include <stdio.h>
int main(void)
{
char *string = "87654321", *endptr;
long lnumber;
/* strtol converts string to long integer */
lnumber = strtol(string, &endptr, 10);
printf("string = %s long = %ld\n", string, lnumber);
return 0;
}
函數名: strupr
功 能: 將串中的小寫字母轉換為大寫字母
用 法: char *strupr(char *str);
程序例:
#include <stdio.h>
#include <string.h>
int main(void)
{
char *string = "abcdefghijklmnopqrstuvwxyz", *ptr;
/* converts string to upper case characters */
ptr = strupr(string);
printf("%s\n", ptr);
return 0;
}
函數名: swab
功 能: 交換字節
用 法: void swab (char *from, char *to, int nbytes);
程序例:
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
char source[15] = "rFna koBlrna d";
char target[15];
int main(void)
{
swab(source, target, strlen(source));
printf("This is target: %s\n", target);
return 0;
}
strncasecmp()compare part of two strings, ignoring case |
Function |
SYNOPSIS
#include <string.h>
int strncasecmp(const char *s1, const char *s2, size_t n);
DESCRIPTION
The function strncasecmp() performs a case-insensitive string comparison for up to the first n characters of the strings pointed to by s1 and s2.
PARAMETERS
- s1
-
Points to a string to compare.
- s2
-
Points to a string to compare.
- n
-
Is the maximum number of characters to compare.
RETURN VALUES
The function strncasecmp() returns a positive integer if, within the first n bytes of string s1 and string s2, disregarding case string s1 is lexically greater than string s2. It returns zero if, other than case, the first n bytes of the two strings are identical. Finally, strncasecmp() returns a negative integer if with the first n bytes, disregarding case string s1 is lexically less than string s2.
CONFORMANCE
UNIX 98.
MULTITHREAD SAFETY LEVEL
MT-Safe.
PORTING ISSUES
None.
AVAILABILITY
PTC MKS Toolkit for Professional Developers
PTC MKS Toolkit for Enterprise Developers
PTC MKS Toolkit for Enterprise Developers 64-Bit Edition