利用kubeadm部署k8s v1.14.2

一、更新源

1、更新docker和k8s源

（这里我使用的是华为源https://mirrors.huaweicloud.com/）

docker-ce

1、若您安装过docker，需要先删掉，之后再安装依赖:
sudo yum remove docker docker-common docker-selinux docker-engine
sudo yum install -y yum-utils device-mapper-persistent-data lvm2
2、根据版本不同，下载repo文件。您使用的发行版： 
CentOS/RHEL
wget -O /etc/yum.repos.d/docker-ce.repo https://repo.huaweicloud.com/docker-ce/linux/centos/docker-ce.repo
软件仓库地址替换为：
sudo sed -i 's+download.docker.com+repo.huaweicloud.com/docker-ce+' /etc/yum.repos.d/docker-ce.repo
3、更新索引文件并安装
sudo yum makecache fast
sudo yum install docker-ce

kubernetes源

1、备份/etc/yum.repos.d/kubernetes.repo文件:
cp /etc/yum.repos.d/kubernetes.repo /etc/yum.repos.d/kubernetes.repo.bak
2、修改/etc/yum.repos.d/kubernetes.repo文件：
cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://repo.huaweicloud.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://repo.huaweicloud.com/kubernetes/yum/doc/yum-key.gpg https://repo.huaweicloud.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
3、SELinux运行模式切换为宽容模式
setenforce 0
4、更新索引文件
yum install -y kubelet kubeadm kubectl --disableexcludes=kubernetes
systemctl enable --now kubelet

2、更新docker镜像加速（网易）

cat >/etc/docker/daemon.json << EOF
{
"registry-mirrors": ["http://hub-mirror.c.163.com"]
}
EOF

二、设置环境

1、关闭防火墙

systemctl stop firewalld && systemctl disable firewalld​

2、关闭selinux

setenforce 0

3、关闭swap

swapoff -a  临时关闭
永久关闭设置/etc/fstab
sed -i 's/.*swap.*/#&/' /etc/fstab

4.内核参数修改

cat > /etc/sysctl.d/k8s.conf <<EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF

sysctl -p 生效

三、安装docker和k8s

master节点操作

1、安装服务

yum install -y docker-ce
yum install -y kubelet kubeadm kubectl

2、拉取镜像

可先通过kubeadm config images list 查看所需镜像，由于镜像都是国外，所以先拉取国内镜像，在tag改名

docker pull mirrorgooglecontainers/kube-apiserver-amd64:v1.14.2
docker pull mirrorgooglecontainers/kube-controller-manager-amd64:v1.14.2
docker pull mirrorgooglecontainers/kube-scheduler-amd64:v1.14.2
docker pull mirrorgooglecontainers/kube-proxy-amd64:v1.14.2
docker pull mirrorgooglecontainers/pause-amd64:3.1
docker pull mirrorgooglecontainers/etcd-amd64:3.3.10
docker pull coredns/coredns:1.3.1

[root@localhost ~]# docker tag mirrorgooglecontainers/kube-proxy-amd64:v1.14.2 k8s.gcr.io/kube-proxy:v1.14.2
[root@localhost ~]# docker tag mirrorgooglecontainers/kube-apiserver-amd64:v1.14.2 k8s.gcr.io/kube-apiserver:v1.14.2
[root@localhost ~]# docker tag mirrorgooglecontainers/kube-controller-manager-amd64:v1.14.2 k8s.gcr.io/kube-controller-manager:v1.14.2
[root@localhost ~]# docker tag mirrorgooglecontainers/kube-scheduler-amd64:v1.14.2 k8s.gcr.io/kube-scheduler:v1.14.2
[root@localhost ~]# docker tag coredns/coredns:1.3.1 k8s.gcr.io/coredns:1.3.1
[root@localhost ~]# docker tag mirrorgooglecontainers/etcd-amd64:3.3.10 k8s.gcr.io/etcd:3.3.10
[root@localhost ~]# docker tag mirrorgooglecontainers/pause-amd64:3.1 k8s.gcr.io/pause:3.1

docker rmi mirrorgooglecontainers/kube-proxy-amd64:v1.14.2
docker rmi mirrorgooglecontainers/kube-apiserver-amd64:v1.14.2
docker rmi  mirrorgooglecontainers/kube-controller-manager-amd64:v1.14.2
docker rmi mirrorgooglecontainers/kube-scheduler-amd64:v1.14.2
docker rmi coredns/coredns:1.3.1
docker rmi mirrorgooglecontainers/etcd-amd64:3.3.10
docker rmi mirrorgooglecontainers/pause-amd64:3.1

3、初始化集群

kubeadm init  --pod-network-cidr=10.244.0.0/16 --kubernetes-version=v1.14.2

记下这里的token，节点加入需要使用

要使kubectl为非root用户工作，请运行以下命令，这些命令也是kubeadm init输出的一部分：

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

或者，如果是root用户，则可以运行（未测试）：

export KUBECONFIG=/etc/kubernetes/admin.conf

查看pod状态  kubectl get pods --all-namespaces

 

此处可以看出我们已经获取到了node节点，但是状态是NotReady,因为此时我们还没有安装网络，接下来我们安装flannel:

4、配置flannel网络

kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml

---
apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
  name: psp.flannel.unprivileged
  annotations:
    seccomp.security.alpha.kubernetes.io/allowedProfileNames: docker/default
    seccomp.security.alpha.kubernetes.io/defaultProfileName: docker/default
    apparmor.security.beta.kubernetes.io/allowedProfileNames: runtime/default
    apparmor.security.beta.kubernetes.io/defaultProfileName: runtime/default
spec:
  privileged: false
  volumes:
    - configMap
    - secret
    - emptyDir
    - hostPath
  allowedHostPaths:
    - pathPrefix: "/etc/cni/net.d"
    - pathPrefix: "/etc/kube-flannel"
    - pathPrefix: "/run/flannel"
  readOnlyRootFilesystem: false
  # Users and groups
  runAsUser:
    rule: RunAsAny
  supplementalGroups:
    rule: RunAsAny
  fsGroup:
    rule: RunAsAny
  # Privilege Escalation
  allowPrivilegeEscalation: false
  defaultAllowPrivilegeEscalation: false
  # Capabilities
  allowedCapabilities: ['NET_ADMIN']
  defaultAddCapabilities: []
  requiredDropCapabilities: []
  # Host namespaces
  hostPID: false
  hostIPC: false
  hostNetwork: true
  hostPorts:
  - min: 0
    max: 65535
  # SELinux
  seLinux:
    # SELinux is unused in CaaSP
    rule: 'RunAsAny'
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: flannel
rules:
  - apiGroups: ['extensions']
    resources: ['podsecuritypolicies']
    verbs: ['use']
    resourceNames: ['psp.flannel.unprivileged']
  - apiGroups:
      - ""
    resources:
      - pods
    verbs:
      - get
  - apiGroups:
      - ""
    resources:
      - nodes
    verbs:
      - list
      - watch
  - apiGroups:
      - ""
    resources:
      - nodes/status
    verbs:
      - patch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: flannel
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: flannel
subjects:
- kind: ServiceAccount
  name: flannel
  namespace: kube-system
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: flannel
  namespace: kube-system
---
kind: ConfigMap
apiVersion: v1
metadata:
  name: kube-flannel-cfg
  namespace: kube-system
  labels:
    tier: node
    app: flannel
data:
  cni-conf.json: |
    {
      "name": "cbr0",
      "cniVersion": "0.3.1",
      "plugins": [
        {
          "type": "flannel",
          "delegate": {
            "hairpinMode": true,
            "isDefaultGateway": true
          }
        },
        {
          "type": "portmap",
          "capabilities": {
            "portMappings": true
          }
        }
      ]
    }
  net-conf.json: |
    {
      "Network": "10.244.0.0/16",
      "Backend": {
        "Type": "vxlan"
      }
    }
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-amd64
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: beta.kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: beta.kubernetes.io/arch
                    operator: In
                    values:
                      - amd64
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.11.0-amd64
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.11.0-amd64
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
            add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-arm64
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: beta.kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: beta.kubernetes.io/arch
                    operator: In
                    values:
                      - arm64
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.11.0-arm64
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.11.0-arm64
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-arm
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: beta.kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: beta.kubernetes.io/arch
                    operator: In
                    values:
                      - arm
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.11.0-arm
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.11.0-arm
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-ppc64le
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: beta.kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: beta.kubernetes.io/arch
                    operator: In
                    values:
                      - ppc64le
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.11.0-ppc64le
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.11.0-ppc64le
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-s390x
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: beta.kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: beta.kubernetes.io/arch
                    operator: In
                    values:
                      - s390x
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.11.0-s390x
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.11.0-s390x
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg

 此时查看pod节点

 显示镜像未拉取，可以手动先pull镜像 quay.io/coreos/flannel:v0.11.0-amd64，此时再查看节点信息，一然后running

节点上操作

1、安装服务

yum install -y docker-ce
yum install -y kubelet kubeadm kubectl

2、拉取镜像

节点只需要安装如下镜像以及flannel网络

docker pull mirrorgooglecontainers/kube-proxy-amd64:v1.14.2
docker pull mirrorgooglecontainers/pause-amd64:3.1
docker pull coredns/coredns:1.3.1
docker pull quay.io/coreos/flannel:v0.11.0-amd64

[root@localhost ~]# docker tag mirrorgooglecontainers/kube-proxy-amd64:v1.14.2 k8s.gcr.io/kube-proxy:v1.14.2
[root@localhost ~]# docker tag coredns/coredns:1.3.1 k8s.gcr.io/coredns:1.3.1
[root@localhost ~]# docker tag mirrorgooglecontainers/pause-amd64:3.1 k8s.gcr.io/pause:3.1

docker rmi mirrorgooglecontainers/kube-proxy-amd64:v1.14.2
docker rmi coredns/coredns:1.3.1
docker rmi mirrorgooglecontainers/pause-amd64:3.1

3、加入k8s集群，使用master创建时显示的token

kubeadm join 192.168.1.201:6443 --token twtrix.t3tv7lzq1drfutv3 --discovery-token-ca-cert-hash sha256:960ca84a78fce6f91b0407b1cc538640ed6769146c6a28c0f3cb2fea96b1bef6

此时在master上就可以看到新加的节点

 四、部署Dashboard

在master节点上进行如下操作：

1.创建Dashboard的yaml文件

wget https://raw.githubusercontent.com/kubernetes/dashboard/v1.10.1/src/deploy/recommended/kubernetes-dashboard.yaml

使用如下命令或直接手动编辑kubernetes-dashboard.yaml文件

sed -i 's/k8s.gcr.io/loveone/g' kubernetes-dashboard.yaml
sed -i '/targetPort:/a\ \ \ \ \ \ nodePort: 30001\n\ \ type: NodePort' kubernetes-dashboard.yaml

手动编辑kubernetes-dashboard.yaml文件时，需要修改两处内容，首先在Dashboard Deployment部分修改Dashboard镜像下载链接，由于默认从官方社区下载，因此修改为：image: loveone/kubernetes-dashboard-amd64:v1.10.1 修改后内容如图，修改后如下：

# Copyright 2017 The Kubernetes Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# ------------------- Dashboard Secret ------------------- #

apiVersion: v1
kind: Secret
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard-certs
  namespace: kube-system
type: Opaque

---
# ------------------- Dashboard Service Account ------------------- #

apiVersion: v1
kind: ServiceAccount
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kube-system

---
# ------------------- Dashboard Role & Role Binding ------------------- #

kind: Role
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kube-system
rules:
  # Allow Dashboard to create 'kubernetes-dashboard-key-holder' secret.
- apiGroups: [""]
  resources: ["secrets"]
  verbs: ["create"]
  # Allow Dashboard to create 'kubernetes-dashboard-settings' config map.
- apiGroups: [""]
  resources: ["configmaps"]
  verbs: ["create"]
  # Allow Dashboard to get, update and delete Dashboard exclusive secrets.
- apiGroups: [""]
  resources: ["secrets"]
  resourceNames: ["kubernetes-dashboard-key-holder", "kubernetes-dashboard-certs"]
  verbs: ["get", "update", "delete"]
  # Allow Dashboard to get and update 'kubernetes-dashboard-settings' config map.
- apiGroups: [""]
  resources: ["configmaps"]
  resourceNames: ["kubernetes-dashboard-settings"]
  verbs: ["get", "update"]
  # Allow Dashboard to get metrics from heapster.
- apiGroups: [""]
  resources: ["services"]
  resourceNames: ["heapster"]
  verbs: ["proxy"]
- apiGroups: [""]
  resources: ["services/proxy"]
  resourceNames: ["heapster", "http:heapster:", "https:heapster:"]
  verbs: ["get"]

---
apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kube-system
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: Role
  name: kubernetes-dashboard
subjects:
- kind: ServiceAccount
  name: kubernetes-dashboard
  namespace: kube-system

---
# ------------------- Dashboard Deployment ------------------- #

kind: Deployment
apiVersion: apps/v1beta2
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kube-system
spec:
  replicas: 1
  revisionHistoryLimit: 10
  selector:
    matchLabels:
      k8s-app: kubernetes-dashboard
  template:
    metadata:
      labels:
        k8s-app: kubernetes-dashboard
    spec:
      containers:
      - name: kubernetes-dashboard
        image: 192.168.0.217:5000/library/kubernetes-dashboard-amd64:v1.10.0
        ports:
        - containerPort: 8443
          protocol: TCP
        args:
          - --auto-generate-certificates
          # Uncomment the following line to manually specify Kubernetes API server Host
          # If not specified, Dashboard will attempt to auto discover the API server and connect
          # to it. Uncomment only if the default does not work.
          # - --apiserver-host=http://my-address:port
        volumeMounts:
        - name: kubernetes-dashboard-certs
          mountPath: /certs
          # Create on-disk volume to store exec logs
        - mountPath: /tmp
          name: tmp-volume
        livenessProbe:
          httpGet:
            scheme: HTTPS
            path: /
            port: 8443
          initialDelaySeconds: 30
          timeoutSeconds: 30
      volumes:
      - name: kubernetes-dashboard-certs
        secret:
          secretName: kubernetes-dashboard-certs
      - name: tmp-volume
        emptyDir: {}
      serviceAccountName: kubernetes-dashboard
      # Comment the following tolerations if Dashboard must not be deployed on master
      tolerations:
      - key: node-role.kubernetes.io/master
        effect: NoSchedule

---
# ------------------- Dashboard Service ------------------- #

kind: Service
apiVersion: v1
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
  namespace: kube-system
spec:
  type: NodePort
  ports:
    - port: 443
      targetPort: 8443
      nodePort: 30001
  selector:
    k8s-app: kubernetes-dashboard
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
rules:
- apiGroups:
  - '*'
  resources:
  - '*'
  verbs:
  - '*'
- nonResourceURLs:
  - '*'
  verbs:
  - '*'
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  labels:
    k8s-app: kubernetes-dashboard
  name: kubernetes-dashboard
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: kubernetes-dashboard
subjects:
- kind: ServiceAccount
  name: kubernetes-dashboard
  namespace: kube-system

2.部署Dashboard

kubectl create -f kubernetes-dashboard.yaml

3.创建完成后，检查相关服务运行状态

kubectl get deployment kubernetes-dashboard -n kube-system
kubectl get pods -n kube-system -o wide
kubectl get services -n kube-system
netstat -ntlp|grep 30001

 4.在Firefox浏览器输入Dashboard访问地址：https://192.168.1.201:30001  （使用火狐浏览器，360和ie都不行，测试了很多遍）

   PS：在谷歌浏览器打开后，如显示，鼠标选中网页，直接键盘输入thisisunsafe，页面将自动刷新，看到惊喜。

5. 查看访问Dashboard的认证令牌

kubectl describe secret -n kube-system $(kubectl get secret -n kube-system | grep kubernetes-dashboard-token | awk '{print $1}')

 

 6.使用上面输出的token登录Dashboard。

 或者配置kubeconfig文件进行登录

TOKEN=$(kubectl describe secret -n kube-system $(kubectl get secret -n kube-system | grep kubernetes-dashboard-token | awk '{print $1}')|grep token|awk 'END {print $2}')
kubectl config set-cluster kubernetes --certificate-authority=/etc/kubernetes/pki/ca.crt --embed-certs=true --server=192.168.0.211:6443  --kubeconfig=dashboard.kubeconfig
kubectl config set-credentials dashboard_user   --token=${TOKEN}   --kubeconfig=dashboard.kubeconfig
kubectl config set-context default   --cluster=kubernetes   --user=dashboard_user   --kubeconfig=dashboard.kubeconfig
kubectl config use-context default --kubeconfig=dashboard.kubeconfig

 认证通过后，登录Dashboard首页如图

PS：报错

1、

 解决办法：

[root@docker-registry ~]# yum install bind-utils                          // 安装dig工具
[root@docker-registry ~]# dig @114.114.114.114 registry-1.docker.io
[root@localhost ~]# dig @114.114.114.114 registry-1.docker.io             IP地址非固定可能会变动，所以需要多试几次（几个IP）

; <<>> DiG 9.11.4-P2-RedHat-9.11.4-9.P2.el7 <<>> @114.114.114.114 registry-1.docker.io
; (1 server found)
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 50465
;; flags: qr rd ra; QUERY: 1, ANSWER: 8, AUTHORITY: 0, ADDITIONAL: 0

;; QUESTION SECTION:
;registry-1.docker.io. IN A

;; ANSWER SECTION:
registry-1.docker.io. 1 IN A 54.174.39.59
registry-1.docker.io. 1 IN A 52.201.142.14
registry-1.docker.io. 1 IN A 34.228.211.243
registry-1.docker.io. 1 IN A 52.87.94.70
registry-1.docker.io. 1 IN A 52.202.253.107
registry-1.docker.io. 1 IN A 34.232.31.24
registry-1.docker.io. 1 IN A 52.55.198.220
registry-1.docker.io. 1 IN A 34.201.196.144

;; Query time: 8 msec
;; SERVER: 114.114.114.114#53(114.114.114.114)
;; WHEN: 四 1月 30 15:05:08 CST 2020
;; MSG SIZE rcvd: 166

选择上面命令执行结果中的一组解析放到本机的/etc/hosts文件里做映射

 

[root@localhost ~]# vim /etc/hosts

52.201.142.14 registry-1.docker.io

 

[root@localhost ~]# docker pull mirrorgooglecontainers/pause-amd64:3.1
3.1: Pulling from mirrorgooglecontainers/pause-amd64
67ddbfb20a22: Pull complete
Digest: sha256:59eec8837a4d942cc19a52b8c09ea75121acc38114a2c68b98983ce9356b8610
Status: Downloaded newer image for mirrorgooglecontainers/pause-amd64:3.1
docker.io/mirrorgooglecontainers/pause-amd64:3.1

2、现象如下：

 coredns一直处于ContainerCreating，通过kubectl describe pods/coredns-fb8b8dccf-k9c77 -n kube-system看到如下错误

 failed to set bridge addr: "cni0" already has an IP address different from 10.244.1.1/24

原因：

       node节点pod无法启动/节点删除网络重置

• node1之前反复添加过,添加之前需要清除下网络

解决方法：

node1之前反复添加过,添加之前需要清除下网络

重置kubernetes服务，重置网络。删除网络配置

kubeadm reset
systemctl stop kubelet
systemctl stop docker
rm -rf /var/lib/cni/
rm -rf /var/lib/kubelet/*
rm -rf /etc/cni/
rm -rf /etc/kubernetes/
rm -rf $HOME/.kube
ifconfig cni0 down
ifconfig flannel.1 down
ifconfig docker0 down
ip link delete cni0
ip link delete flannel.1
systemctl start docker

3、

 原因：kubenetes master没有与本机绑定，集群初始化的时候没有设置

解决方法：

[root@k8s-master ~]# mkdir -p $HOME/.kube
[root@k8s-master ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@k8s-master ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/config