华为设备配置ssh

[R1-aaa] local-user huawei password cipher huawei privilege level 3

Info: Add a new user.

[R1-aaa] local-user huawei service-type ssh

 

[R1-aaa] q

[R1] ssh user huawei authentication-type password

Authentication type setted, and will be in effect next time

[R1] stelnet server enable

Info: Succeeded in starting the STELNET server.

[R1] rsa local-key-pair create

The key name will be: Host

% RSA keys defined for Host already exist.

Confirm to replace them? (y/n)[n] :y

The range of public key size is (512 ~ 2048).

NOTES: If the key modulus is greater than 512,

It will take a few minutes.

Input the bits in the modulus[default = 512]: 1023

Generating keys...

....................................++++++

................++++++

.......++++++++

...++++++++

 

[R1]

[R1] user-interface vty 0 4

[R1-ui-vty0-4] authentication-mode aaa

[R1-ui-vty0-4] protocol inbound ssh

 

验收，R1与sw1链接口g0/0/1

[R1] dis cu int g0/0/1

[V200R003C00]

#

interface GigabitEthernet0/0/1

ip address 10.1.11.1 255.255.255.248

#

return

 

 

SW1 验证

[SW1] dis cu interface Vlanif 1
#
interface Vlanif1
 ip address 10.1.11.2 255.255.255.248
#
return
[SW1]

 

[SW1] ssh client first-time enable

[SW1] stelnet 10.1.11.1

Please input the username: huawei

Trying 10.1.11.1 ...

Press CTRL+K to abort

Connected to 10.1.11.1 ...

The server is not authenticated. Continue to access it? [Y/N] : y

Save the server's public key? [Y/N] :

May 28 2019 11:07:17-08:00 SW1 %%01SSH/4/CONTINUE_KEYEXCHANGE(l)[0]:The server had not been authenticated in the process of exchanging keys. When deciding whether to continue, the user chose Y. y

The server's public key will be saved with the name 10.1.11.1. Please wait...

 

May 28 2019 11:07:24-08:00 SW1 %%01SSH/4/SAVE_PUBLICKEY(l)[1]:When deciding whether to save the server's public key 10.1.11.1, the user chose Y.

Enter password: huawei

<R1>