每次去带机房去机房都要设置固定ip，回来还要再调回来，我觉得太麻烦，于是简单学习了下批处理脚本
@echo off :: BatchGotAdmin :------------------------------------- REM --> Check for permissions >nul 2>&1 "%SYSTEMROOT%\system32\cacls.exe" "%SYSTEMROOT%\system32\config\system" REM --> If error flag set, we do not have admin. if '%errorlevel%' NEQ '0' ( goto UACPrompt ) else ( goto gotAdmin ) :UACPrompt echo Set UAC = CreateObject^("Shell.Application"^) > "%temp%\getadmin.vbs" echo UAC.ShellExecute "%~s0", "", "", "runas", 1 >> "%temp%\getadmin.vbs"
"%temp%\getadmin.vbs" exit /B :gotAdmin if exist "%temp%\getadmin.vbs" ( del "%temp%\getadmin.vbs" ) pushd "%CD%" CD /D "%~dp0" :-------------------------------------- echo 设置自动ip请按1 echo 设置固定ip请按2 echo 请选择,或按q退出 set /p shu=
if "%shu%"=="1" cls&goto ONE if "%shu%"=="2" cls&goto TWO if "%shu%"=="q" exit :TWO echo 正在设置您的固定IP地址请稍等…… netsh interface ip set address name="以太网" source=static addr=222.27.184.29 mask=255.255.255.128 gateway=222.27.184.62 gwmetric=1 echo 正在设置您的DNS，请稍等…… netsh interface ip set dns name="以太网" source=static addr=210.46.112.8 register=PRIMARY validate=no netsh interface ip add dns name="以太网" addr=202.97.224.68 validate=no netsh interface ip set wins name="以太网" source=static addr=none set /p wait= 设置成功，按任意键退出 exit :ONE echo 正在设置自动获得IP地址，请稍等…… netsh interface ip set address name="以太网" source=dhcp netsh interface ip set dns name="以太网" source=dhcp set /p wait= 设置成功，按任意键退出 exit
这是设置ip地址，子网掩码和默认网关的
netsh interface ip set address name="以太网" source=static addr=222.27.184.29 mask=255.255.255.128 gateway=222.27.184.62 gwmetric=1
这是设置首选dns和备用dns的
netsh interface ip set dns name="以太网" source=static addr=210.46.112.8 register=PRIMARY validate=no netsh interface ip add dns name="以太网" addr=202.97.224.68 validate=no