4.x的內核都是已經支持設備樹的,所以platform bus也是做了一些調整。 主要是在匹配函數里面的支持設備樹。 struct bus_type platform_bus_type = { .name = "platform", .dev_groups ...
本文轉載自:http: blog.csdn.net ruanjianruanjianruan article details 內核添加dts后,device和device driver的match匹配的變動: 先看platform總線: driver base platform.c文件: static int platform match struct device dev, struct dev ...
2017-12-21 19:55 0 1062 推薦指數:
4.x的內核都是已經支持設備樹的,所以platform bus也是做了一些調整。 主要是在匹配函數里面的支持設備樹。 struct bus_type platform_bus_type = { .name = "platform", .dev_groups ...
一、spi總線注冊 這里所說的SPI核心,就是指/drivers/spi/目錄下spi.c文件中提供給其他文件的函數,首先看下spi核心的初始化函數spi_init(void)。 ...
有上一篇文章,我們了解了dts的背景知識和相關基礎,這次我們對應實際設備進行一下相關分析。 DTS設備樹的匹配過程 一個dts文件確定一個項目,多個項目可以包含同一個dtsi文件。找到該項目對應的dts文件即找到了該設備樹的根節點。 kernel\arch\arm\boot ...
轉自:http://blog.csdn.net/machiner1/article/details/47805069 ------------------Based on linux 3.10.24 source code 參考/documentation/devicetree ...
Linux 內核:設備驅動模型(2)driver-bus-device與probe 系列:Linux 內核:設備驅動模型 學習總結 參考: https://blog.csdn.net/lizuobin2/article/details/51570196 https ...
Device Tree常用方法解析 Device Tree在Linux內核驅動中的使用源於2011年3月17日 ...
Linux設備樹(Device Tree)機制 Linux設備樹語法詳解 Linux內核 設備樹操作常用API ...
Ref:CSDN 幾個需要添加to.device的地方 model(如:model.to(device)) input(通常需要使用Variable包裝,如:input = Variable(input).to(device)) target(通常需要使用Variable包裝 ...