kent@hu:~/work/03-kernel/linux-4.15.1$ make menuconfig *** Unable to find the ncurses libraries or the *** required header files. *** 'make ...
root zhangbin desktop ubuntu: usr src linux headers . . make menuconfig HOSTCC scripts basic fixdep HOSTCC scripts basic docproc HOSTCC scripts basic hash HOSTCC scripts kconfig conf.o scripts kconfig ...
2012-04-12 10:07 0 5192 推荐指数:
kent@hu:~/work/03-kernel/linux-4.15.1$ make menuconfig *** Unable to find the ncurses libraries or the *** required header files. *** 'make ...
linux2.2.6 内核 编译器 3.4.5 首先makefile 文件要修改两行,要安装图形库,在韦老大配置环境中写了 还要进行sudo apt-get install libncurses*,后面这句比较关键,前面的随便百度都能行 ...
Make Menuconfig简介 make menuconfig 图形化的内核配置make mrproper -----删除不必要的文件和目录. #make config(基于文本的最为传统的配置界面,不推荐使用) #make menuconfig(基于文本选单的配置界面,字符终端 ...
Linux下面去编译项目之前,一般常会用make mrproper去先删除之前编译所生成的文件和配置文件,备份文件等,其中,mrproper和distclean,clean之间的区别,Linux内核源码根目录下面的makefile中,有很清晰的解释:help: @echo 'Cleaning ...
目标: 分析make menuconfig内核配置过程 在上1小结中(内核编译试验)讲到了3种不同的配置: (1)通过make menuconfig 直接从头到尾配置.config文件 (2) 通过make s3c2410_deconfig 命令在默认的配置上进行自动修改 ...
主 机:VMWare--Ubuntu-16.04.2-x64-100ask开发板:JZ2440--256M NandFlash, 2M NorFlash, 64M SDRAM, LCD-4.3寸; bootlorder:u-boot1.16, Kernel:2.6.22.6;编译器 ...
linux驱动调试的时候,可以自己写的驱动作为modules ,然后手动加载到内核 ,但是最终为了方便,还是需要把写好的驱动添加到内核的meke menuconfig里面,这里记录一个很有用的比较详细的文档。 linux内核中Kconfig文档的作用 2.6内核的源码树目录下一般都会 ...
转自:https://www.cnblogs.com/tfanalysis/p/3625430.html 参考网站:http://wiki.openwrt.org/doc/howto/buil ...